KC600 SSD

Hardware-based PLP — Power loss capacitors to

protect user data against unexpected power loss and

enhance performance.

Delivers excellent Quality of Service (QoS) 2 —

Optimized performance predictability to hit Service-

level agreements (SLAs).

SPECIFICATIONS

FEATURES / BENEFITS

AES 256-bit Self Encrypting Drive — Built in protection

to safeguard important data.

Capacities up to 7680GB — Upgrade and manage

storage with capacities up to 7680GB1.

Form Factor

2.5”

Interface

SATA Rev. 3.0 (6Gb/s) – with backwards

capability to SATA Rev 2.0 (3Gb/s)

Capacities1

480GB, 960GB, 1920GB, 3840GB, 7680G

NAND

3D TLC

Self-Encrypting Drive (SED)

AES 256-bit Encryption

Sequential Read/Write

480GB – 560MBs/470MBs

960GB – 560MBs/530MBs

1920GB – 560MBs/530MBs

3840GB – 560MBs/530MBs

7680GB – 560MBs/530MBs

Steady State 4k Random Read/Write

480GB – 94,000/41,000 IOPS

960GB – 94,000/65,000 IOPS

1920GB – 94,000/78,000 IOPS

3840GB – 94,000/59,000 IOPS

7680GB – 94,000/34,000 IOPS

Quality of Service (Latency)3,4,5,

(99.999) Read/Write

480GB – 180/110 uSec

960GB – 3840GB – 200/300 uSec

7680GB – 240/170 uSec

Typical Latency - Read/Write3,4,5

<200 µs / <30 us

Hot-Plug Capable

Static and Dynamic Wear Leveling

Enterprise SMART tools

Reliability tracking, usage statistics, life

remaining, wear leveling, temperature

Hardware-based Power Loss

Protection Endurance6,7

480GB – 876TBW, 1 DWPD (5 years), 1.66

DWPD (3 years)

960GB – 1752TBW, 1 DWPD (5 years), 1.66

DWPD (3 years)

1920GB – 3504TBW, 1 DWPD (5 years),

1.66 DWPD (3 years)

THIS DOCUMENT SUBJECT TO CHANGE WITHOUT NOTICE.

©2023 Kingston Technology Corporation, 17600 Newhope Street, Fountain Valley, CA 92708 USA. All rights reserved.

All trademarks and registered trademarks are the property of their respective owners. MKD-457

3840GB – 7008TBW, 1 DWPD (5 years),

1.66 DWPD (3 years)

7680GB – 14016TBW, 1 DWPD (5 years),

1.66 DWPD (3 years)

Power consumption

Idle: 1.30W

Average: 1.45W

Max Read: 1.6W

Max Write: 3.6W

Storage temperature

-40°C ~ 85°C

Operating temperature

0°C ~ 70°C

Dimensions

69.9mm x 100mm x 7mm

Weight

92.34g

Vibration operating

2.17G Peak (7–800Hz)

Vibration non-operating

20G Peak (10–2000Hz)

MTBF

2 million hours

Viberation non-operating

20G Peak (10-2000Hz)

Warranty/support8

Limited 5-year warranty with free

technical support

1. Some of the listed capacity on a flash storage device is used for formatting and other functions and thus is not available

for data storage. As such, the actual available capacity for data storage is less than what is listed on the products. For

more information, go to Kingston’s Flash Memory Guide at kingston.com/flashguide

2. Quality of Service (QoS) of an SSD refers to the consistency and predictability of Latency (response time) and IOPS (IOs

Per Second) performance while servicing a read/write workload. QoS metrics demonstrate that, given a worst-case

workload tested over a period of time, an SSD’s latency and IOPS profiles stay within a specified range without having

unexpected outliers causing a sudden drop in application performance.

3. Measurement taken once the workload has reached steady state but including all background activities required for

normal operation and data reliability.

4. Based on 1920GB capacity.

5. Workload based on FIO, Random Aligned 4KB QD=1 workload. Quality of Service is measured as the time taken for

99.999 percentile of commands to finish the round-trip from host to drive and to host. Typical Latency is measured as

the time taken for 99.999 percentile of commands to finish the round-trip from host to drive and to host.

6. Total Bytes Written (TBW) is derived from the JEDEC Enterprise Workload (JESD219A)..

7. Drives Writes Per Day (DWPD).

8. Five Year Conditional SSD Warranty based on which of the following events occurs first: (i) five (5) years from the

date of purchase by the original end user customer; (ii) when the usage of a SATA SSD as measured by Kingston’s

implementation of the SMART attribute 231, labeled as “SSD Wear Indicator”, reaches a normalized value of one (1) as

indicated by Kingston’s SSD Manager (“KSM”).

KINGSTON PART NUMBERS

DC600M SSD

SEDC600M/480G

SEDC600M/960G

SEDC600M/1920G

SEDC600M/3840G

SEDC600M/7680G