- 94 -

All Data Subject To Change Without Notice

www.andersonpower.com

SB® 175 Connector not included.

Mounting Plate

Hardware

SB® Environmental Boots

SB® Environmental Boots provide water, dirt, chemical and UV protection for SB® 175

connectors. The durable boots shield the connectors from water and dirt to IP64* in

both the mated and unmated condition.

Dimensions

- A -

- B -

- C -

Description

Part Numbers

in. mm

in. mm

in.

mm

Minimum Quantity

250

25

SB® 175 Environmental Boot, Load

3-6037P1-BK

3-6037P1

9.5 241

3.2 80

9.3 236

SB® 175 Environmental Boot, Source

3-6036P1-BK

3-6036P1

9.5 241

3.2 80

9.3 236

* IP64 test pending

SB® 175 Lockout

Works with standard lockout - tagout equipment to prevent access

to the mating interface of the connector. Made from durable PC plastic.

Can be used with 3 pole housing to lockout positive and negative

positions only.

Description

Part Number

Minimum Quantity

25

Red Lockout - Tagout Kit

SB175-LOCKOUT

Manual Release Bracket - Mounting Side *

Works with the Locking Side to ease mating and unmating connectors.

Not for use with 3 pole housing.

Description

Part Number

Minimum Quantity

10

Mounting Plate and Hardware Kit

924G1

* Torque value 30 (in - lbs) / 3.4 (Nm)

NOTE: For assembly of bracket to housing only

Manual Release Bracket - Locking Side *

Works with the Mounting Side to ease mating and unmating

connectors. Not for use with 3 pole housing.

Cable Size

Max / Min

Max / Min

Description

Inches O.D.

mm O.D.

Part Number

Minimum Quantity

10

Locking plate, handle, clamp and hardware kit.

0.50 to 0.21

12.6 to 5.4

923G1

* Torque value 30 (in - lbs) / 3.4 (Nm)

NOTE: For assembly of bracket to housing only

The given wire O.D. information is an estimate. Cable clamps should be evaluated for

performance with the actual wire to be used.

A

B

C

[ 90 ]

3.5