LPC2880_LPC2888_1

© Koninklijke Philips Electronics N.V. 2006. All rights reserved.

Preliminary data sheet

Rev. 01 — 22 June 2006

26 of 34

Philips Semiconductors

LPC2880; LPC2888

16/32-bit ARM microcontrollers with external memory interface

7.

Limiting values

[1]

The following applies to Table 5:

a) This product includes circuitry specifically designed for the protection of its internal devices from the damaging effects of excessive

static charge. Nonetheless, it is suggested that conventional precautions be taken to avoid applying greater than the rated maximum.

otherwise noted.

[2]

All inputs are 5 V tolerant except external memory bus and USB pins.

[3]

Including voltage on outputs in 3-state mode.

[4]

5 V tolerant pins

[5]

Other I/O pins.

[6]

Per supply pin.

[7]

Per ground pin.

[8]

Human body model: equivalent to discharging a 100 pF capacitor through a 1.5 k

Ω series resistor.

[9]

Machine model: equivalent to discharging a 200 pF capacitor through a 0.75

µH coil and a 10 Ω series resistor.

Table 5.

Limiting values

In accordance with the Absolute Maximum Rating System (IEC 60134).[1]

Symbol

Parameter

Conditions

Min

Max

Unit

supply voltage (1.8 V)

−0.5

+1.95

V

supply voltage (3.3 V)

−0.5

+3.6

V

external memory controller

supply voltage

in 1.8 V range

−0.5

+1.95

V

in 3.3 V range

−0.5

+3.6

V

analog input voltage

−0.5

V

input voltage

[2][3][4]

−0.5

+5.0

V

[2][3][5]

−0.5

+3.6

V

supply current

[6] <tbd>

<tbd>

mA

ground current

[7] <tbd>

<tbd>

mA

storage temperature

−40

+125

°C

total power dissipation (per

package)

based on package

heat transfer, not

device power

consumption

-

<tbd>

W

electrostatic discharge voltage

human body model

[8]

all pins

−2000

+2000

V

machine model

[9]

all pins

−200

+200

V