http://www.tracopower.com

Page 3 of 4

General Specifications

Safety standards

– CB test certificate

IEC 60950-1:2005 2nd Ed, Am 1:2009

IEC/EN 61010-1, IEC 61010-2-201

– SIQ type approved

EN 60950-1 :2006 + Am 1 :2010 +

Am 11 :2009 + Am 12:2011

IEC/EN 61010-1, IEC/EN 61010-2-201

– CSA certificate of compliance

UL 60950-1-2nd Ed

CSA 60950-1-07-2nd Ed

– UL certificate of compliance

UL 508, CSA C22.2 No.107.1-01

– SIQ type approved

EN 60204-1:2006 + A1:2009,

EN 61558-2-8:2010, EN 61558-2-16:2009,

EN 50178:1997

– Certification documents

www.tracopower.com/overview/tpc

Environmental compliance

– Reach declaration document

www.tracopower.com/info/reach-declaration.pdf

– RoHS

RoHS directive 2011/65/EU

EMC

– emissions

IEC 61000-6-3 (residential environment)

– immunity

IEC 61000-6-2 (industrial environment)

SEMI F47

Class of protection

class I (earth connection needed)

Case protection

IP 20 (IEC 60529)

Enclosure material

Makrolon 2405 (UL 94V-0 rated)

Mounting

DIN-rails as per EN 50022-35x15/7.5

(snap-on with self-locking spring)

wall mounting bracket optional (not included)

Industrial Power Supplies

TPC Series

30 to 120 Watt

All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.

TPC–REM240-24 Redundancy Module

These modules are external units for operation with two TPC power supplies with

output voltage of 24 VDC or 48 VDCand of same type and power. The modules

allow to connect two outputs of TPC power supplies together in order to achieve a

reliable DC supply. In normal operation the module achieves equal current share

for both power supplies connected. During the redundancy operation, if one of

the power supplies fails, the output power will be provided in full by the remain-

ing operating power supply. The redundancy of the DC system is monitored by a

DC-OK signal.

Order Code

Nominal Input

Voltage

Max Power

per Input

Output Voltage

adjustable

Output Current

max.

TPC–REM240–24

24 VDC

120 W

24 – 27 VDC

10 A

TPC–REM240–48

48 VDC

48 – 55 VDC

5 A

Specifications

Operating temperature

–25°C to +70°C max. (with derating)

Electromagnetic compatibility

in correspondence to connected units

(no internal switching device)

Dimensions

same as model TPC 055 (see page 4)

Connection

screw terminal block

Installation instructions

– installation document

www.tracopower.com/overview/tpc

Supporting documents: www.tracopower.com/overview/tpc