F2LP-W

F2LP-W

8

a metal object close to the coil of the Sensor. Keep metal away

from the coil by at least the distances indicated in the following

drawings.

F2LP-W10M

Metal

Metal

10 mm

max.

F2LP-W20M

Metal

Metal

19 mm max.

F2LP-W50M

Metal

Metal

11 mm max.

F2LP-W75M

Metal

Metal

34

mm

max.

112 dia.

min.

F2LP-W100M

Metal

Metal

Metal

Metal

Note:

To mount the F2LP-W75M on a flange, open

a hole of at least 112 dia. min.

Note:

To mount the F2LP-W100M on a flange, open

a hole of at least 150 dia.

150

dia.

min.

25

mm

Mutual Interference

of the Sensors and then separate the Sensors one another by at

least the distances indicated in the following drawings. The

distances in parentheses apply when the Sensors are set to

different frequencies.

Facing

each other

In

parallel

Model

Facing (

Parallel (

F2LP-W10M

500 (100)

500 (100)

F2LP-W20M

500 (100)

500 (100)

F2LP-W50M

500 (100)

500 (100)

F2LP-W75M

750 (150)

750 (150)

F2LP-W100M

1,000 (200)

1,000 (200)

Others

Sensor needs an interval of 1 to 2 seconds after power is on to

function normally and sense objects.

the Amplifier Unit terminals, always use a cable with a conductor

thickness of no more than 10 mm.

Sensor

10 mm max.

Sensor cable

Amplifier

Unit

stationary or if the sensing object is always present such as the

case when line breakage is detected.

not to touch or come in contact with the Sensor because any

contact with the sensing surface will be detected.

OMRON Corporation

Systems Components Division H.Q.

28th Fl., Crystal Tower Bldg.

1-2-27, Shiromi, Chuo-ku,

Osaka 540 Japan

Phone: 06-949-6012 Fax: 06-949-6021

ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.

To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.

Cat. No. D32-E1-2

In the interest of product improvement, specifications are subject to change without notice.

Printed in Japan

0997-0.5M (0590) a