3.6 V, 0.5 W, RF Power Amplifier IC for DECT

1800 - 2000 MHz

MAAPSS0107

M/A-COM Inc. and its affiliates reserve the right to make changes to the

product(s) or information contained herein without notice. M/A-COM makes

no warranty, representation or guarantee regarding the suitability of its

products for any particular purpose, nor does M/A-COM assume any liability

whatsoever arising out of the use or application of any product(s) or

information.

• North America Tel: 800.366.2266 / Fax: 978.366.2266

• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300

• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298

Visit www.macom.com for additional data sheets and product information.

V1

2

RoHS

Compliant

measured on evaluation board.

Parameter

Test Conditions

Units

Min.

Typ.

Max.

Frequency

—

MHz

1880

1900

1930

Output Power

1900 MHz

dBm

25.0

26.9

28.0

Power Added Efficiency

1900 MHz

%

—

57

—

Drain Current

1900 MHz

mA

—

228

330

2nd Harmonics

—

dBc

—

-37

-30

3rd Harmonics

—

dBc

—

-38

-34

Input VSWR

—

Ratio

—

1.3:1

2.0:1

Off Isolation

dB

—

44

—

Thermal Resistance

4

°C/W

—

25

—

Load Mismatch

No Degradation in Power Output

Stability

all phases

All non-harmonically related outputs more

than 60 dB below desired signal

5. Output power and efficiency have been optimized for input drive levels between -2 and +2 dBm. Stability is only specified within this

range. For operation outside of this range, contact the factory.

†

Reference Application Note M538 for lead-free solder reflow recommendations.