2.3 Layout and Component Placement

Figure 2-3 and Figure 2-4 show the top and bottom assemblies of the printed circuit board (PCB) to show the

component placement on the EVM.

Figure 2-5 and Figure 2-6 show the top and bottom layouts, Figure 2-7 and Figure 2-8 show the top and bottom

layers, and Figure 2-9 shows the top solder mask of the EVM.

2.4 Layout

Figure 2-3. Component Placement—Top Assembly

Schematic, Bill of Materials, and Layout

www.ti.com

10

TPS38700Q1EVM Voltage Sequencer

SNVU771A – JULY 2021 – REVISED APRIL 2022

Submit Document Feedback

Copyright © 2022 Texas Instruments Incorporated