CLA, CLB

www.vishay.com

Vishay Electro-Films

Revision: 30-May-2022

1

Document Number: 61009

For technical questions, contact: efi@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Wire Bondable Thin Film Resistor Arrays

Product may not be to scale

The CLA and CLB resistor arrays are the hybrid equivalent

to the eight resistor common connection and isolated

networks available in sips or dips. The resistors are spaced

on 0.010" centers resulting in minimal space requirements.

These chips are manufactured using Vishay Electro-Films

(EFI) sophisticated thin film equipment and manufacturing

technology. The CLA and CLBs are 100 % electrically tested

and visually inspected to MIL-STD-883.

FEATURES

• Wire bondable

• Up to 12 equal value resistors

• For case see Part Dimensions table

• Resistance range: 20

Ω to 1 MΩ

• Excellent TCR tracking

• Resistor material:

tantalum nitride, self-passivating

• Oxidized silicon substrate for good power

dissipation

• Custom values and pad geometries available

• Moisture resistant

• Material categorization: for definitions of compliance

please see www.vishay.com/doc?99912

APPLICATIONS

The CLA and CLB thin film resistor arrays are designed for

hybrid packages requiring up to twelve resistors of the same

resistance value and tolerance, as well as excellent TCR

tracking. For such hybrids, they afford great savings in cost

and space.

TEMPERATURE COEFFICIENT OF RESISTANCE, VALUES, AND TOLERANCES

PARAMETER

VALUE

UNIT

Total Resistance Range

20 to 1M

Ω

Standard Tolerances

± 0.1, ± 0.5

%

TCR

± 25, ± 50, ± 100

ppm/°C

STANDARD ELECTRICAL SPECIFICATIONS

PARAMETER

VALUE

UNIT

TCR Tracking Spread

± 5

ppm/°C

Noise, MIL-STD-202, Method 308

100

Ω to 250 kΩ

< 100

Ω or > 251 kΩ

-35 typ.

-20 typ.

dB

Moisture Resistance, MIL-STD-202, Method 106

± 0.5 max.

ΔR/R

%

Stability, 1000 h, +125 °C, 25 mW

Absolute

Ratio

± 0.25 max.

ΔR/R

± 0.05 max.

ΔR/R

%

Operating Temperature Range

-55 to +125

°C

Thermal Shock, MIL-STD-202

Method 107, Test Condition F

± 0.1 max.

ΔR/R

%

High Temperature Exposure, ± 150 °C, 100 h

± 0.2 max.

ΔR/R

%

Dielectric Voltage Breakdown

200

V

Insulation Resistance

1012 min.

Ω

Operating Voltage

100

V

DC Power Rating at +70 °C (Derated to Zero at 175 °C)

0.050 per resistor

W

5 x Rated Power Short-Time Overload, +25 °C, 5 s

± 0.1 % max.

ΔR/R

%

Tightest Standard Tolerance Available

0.5 %

0.1 %

20

:

300

:

300 k

:

500 k

: 1 M:

± 25 ppm/°C

± 50 ppm/°C

± 100 ppm/°C