CC7, CCB

www.vishay.com

Vishay Electro-Films

Revision: 18-Apr-13

1

Document Number: 61012

For technical questions, contact: efi@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Thin Film Resistor Divider Network on Alumina, User Trimmable

Product may not be to scale

The CC7 and CCB series resistor chips offer the

combination of user trimmability, low shunt capacitance and

excellent stability. The CC7 and CCB can be specified as

either a single RT value resistor, as two resistors with a

center tap feature (1:1 ratio or custom) ratio or user

trimmable.

The CC7 and CCBs a six bonding pads allows the user

increased layout flexibility. The CC7 and CCBs are

manufactured using Vishay Electro-Films (EFI) sophisticated

thin film equipment and manufacturing technology. They are

100 % electrically tested and visually inspected to

MIL-STD-883, method 2032 class H or class K.

FEATURES

• Wire bondable

• Small single chip size



CC7 - 0.030" x 0.030"



CCB - 0.050" x 0.050"

• Case: 0303, 0505

• Alumina substrate

• Low stray capacitance: < 0.2 pF

• Resistance range RT: 

100

 to 20 k for CC7

100

 to 50 k for CCB

• Resistor material: Nichrome

• User trimmable

• Material categorization: For definitions of compliance

please see www.vishay.com/doc?99912

APPLICATIONS

Vishay EFI CC7 and CCB chip resistors provide excellent

high frequency response and are ideally suited for

prototyping.

Typical application areas are:

•Amplifiers

• Oscillators

• Attenuators

•Couplers

•Filters

Recommended for hermetic environments where die is not

exposed to moisture

Note

• Performance characteristics are not guaranteed once user trimmed

TEMPERATURE COEFFICIENT OF RESISTANCE, VALUES, AND TOLERANCES

PARAMETER

VALUE

UNIT

Total Resistance Range

100 to 50K



Standard Tolerances

± 0.1

%

TCR

± 10, ± 25, ± 50, ± 100

ppm/°C

STANDARD ELECTRICAL SPECIFICATIONS

PARAMETER

VALUE

UNIT

Noise, MIL-STD-202, Method 308

- 20 typ.

dB

Stability, 1000 h, + 125 °C at Rated Power

+ 0.1 max.

R/R

%

Operating Temperature Range

- 55 to + 125

°C

Thermal Shock, MIL-STD-202, Method 107, Test Condition F

+ 0.25 max.

R/R

%

High Temperature Exposure, + 150 °C, 100 h

+ 0.25 max.

R/R

%

Dielectric Voltage Breakdown

400

V

Insulation Resistance

1012 min.



Operating Voltage

100 max.

V

DC Power Rating at 125 °C

0.1 max. (50 mil)

W

0.05 max. (30 mil)

5 x Rated Power Short-Time Overload, + 25 °C, 5 s

+ 0.25 max.

R/R

%

± 25 ppm/°C

0.1 %

100

Ω

Tightest Standard Tolerance Available

± 100 ppm/°C

± 50 ppm/°C

50 k

Ω

200

Ω

1 k

Ω

± 10 ppm/°C