1 of 2

3M™ Comfort Grip Gloves

Data Sheet

January 2020

Product

Description

3M Comfort Grip Gloves offer a comfortable alternative to the traditional cotton and leather

work glove. The gloves are designed to offer a comfortable, breathable fit and are perfectly

suited for applications where hand flexibility and dexterity are needed. The coated palm

provides gripping ability in wet or oily applications. The Comfort Grip Cut Resistant gloves are

an excellent choice for applications when working with sharp tools or edges. The 3M Comfort

Grip Winter Gloves helps keep hands warm in colder climates.

Agency

Approvals &

Self

Certifications

*ANSI 105-2016 Cut Level (A1

– A9). Previous ANSI ratings based on ANSI 105-2011 Cut Level (0-5).

**EN 388:2016: Abrasion Level (1-4), Coupe Cut Level (1-5), Tear (1-4), Puncture (1-4), TDM Cut Test (A-F). Please

note that the TDM cut resistance test is the reference performance result, and the Coupe test results are only indicative

where both cut resistance test results are shown for EN388:2016. Previous EN 388 levels based on EN 388 2003:

Abrasion (1-4), Coupe cut test (1-5), Tear (1-4), Puncture (1-4). Test levels only indicative of palm area.

Materials

Note: Gloves may contain ingredients known to be a possible cause of irritation and/or allergic

reaction in persons sensitive to such materials. Immediately seek medical advice if an allergic

reaction should occur.

Glove Sizing

It is important to order the right size to insure the best protection and most comfortable fit.

Sizes are determined by measuring the circumference of the hand with a tape measure

in inches just below the knuckles with the hand closed. These measurements will not

account for all possible variations in hand size.

Size #

Size

Care Instructions Gloves are hand and machine washable. Do not use chlorine or oxygen bleach. Hang

glove to dry in shaded area. Performance characteristics may degrade due to laundering.

Standard

Mechanical

Risks

Model

CG-GU

Model

CG-CR

Model

CGCRE

Model

CG-W

ANSI 105-2016*

Blade Cut Res.

N/A

Level A3

Level A1

N/A

EN388:2016**

Abrasion Res

Level 3

Level 4

Level 4

Level 2

Coupe Cut Test

Level 1

Level 4

Level 3

Level 1

Tear Res.

Level 2

Level 4

Level 4

Level 2

Puncture Res.

Level 2

Level 4

Level 2

Level 1

TDM Cut Test

Level A

Level D

Level B

Level A

Model CG-GU

Nitrile Foam / Nylon Fiber

Model CG-CR

Nitrile Foam / UHMWPE Glass/Nylon Fiber

Model CG-CRE

Polyurethane Palm / HPPE / Synthetic Yarns

Model CG-W

Nitrile Foam / Polyester / Spandex

8

9

10

M

L

XL