Data Sheet

ADL8142-2

ABSOLUTE MAXIMUM RATINGS

analog.com

Rev. 0 | 5 of 8

Table 5.

Parameter

Rating

VDD

4.0 V

RFIN

20 dBm

Continuous Power Dissipation (PDISS), TC = 85°C

(Derate 6 mW/°C Above 85°C)

0.54 W

Temperature

Storage Range

−65°C to +150°C

Operating Range

−55°C to +85°C

Nominal Channel (TC = 85°C, VDD = 2 V, IDQ = 25

mA, Input Power (PIN) = Off)

93.3°C

Maximum Channel

175°C

Stresses at or above those listed under Absolute Maximum Ratings

may cause permanent damage to the product. This is a stress

rating only; functional operation of the product at these or any other

conditions above those indicated in the operational section of this

specification is not implied. Operation beyond the maximum operat-

ing conditions for extended periods may affect product reliability.

THERMAL RESISTANCE

Overall thermal performance is directly linked to the carrier or

substrate on which the die is mounted. Careful attention is needed

with each material used in the thermal path below the IC. With an

epoxy layer of nominal thickness assumed under the die, θJC is the

thermal resistance from the die channel to the bottom of the epoxy

layer.

Table 6. Thermal Resistance

Package Type

θJC

Unit

C-8-28

166.5

°C/W

OUTGAS TESTING

The criteria used for the acceptance and rejection of materials must

be determined by the user and based upon specific component and

system requirements. Historically, a total mass loss (TML) of 1.00%

and collected volatile condensable material (CVCM) of 0.10% have

been used as screening levels for rejection of spacecraft materials.

Table 7. Outgas Testing

Specification (Tested

per ASTM E595 -15)1

Value

Unit

Total Mass Lost

0.10

%

Collected Volatile

Condensable Material

0.01

%

Water Vapor Recovered

0.02

%

1 Outgas testing was performed after encapsulating the ADL8142-2C-CSL chip

in the 8-lead lead frame chip scale package (LFCSP) of the ADL8142 .

ELECTROSTATIC DISCHARGE (ESD) RATINGS

The following ESD information is provided for handling of ESD-sen-

sitive devices in an ESD protected area only.

Human body model (HBM) per ANSI/ESDA/JEDDEC JS-001.

ESD Ratings for the ADL8142-2C-CSL

Table 8. ADL8142-2C-CSL, 8-Pad CHIP

ESD Model

Withstand Threshold (V)

Class

HBM

±250

1A

ESD CAUTION

ESD (electrostatic discharge) sensitive device. Charged devi-

ces and circuit boards can discharge without detection. Although

this product features patented or proprietary protection circuitry,

damage may occur on devices subjected to high energy ESD.

Therefore, proper ESD precautions should be taken to avoid

performance degradation or loss of functionality.