PM4100APD datasheet(6/14 Pages) SAMES

6 / 14 page

6/14

http://www.sames.co.za

sames

PM4100APD

SA2102D

Name

J10

J11

J12

J13

J14, J15

J17,

J18,

J19

J20

J21

J23

J25

State

A: Setting to A and J20 to + enables the FAST

output mode. Leaving J10 and J20 open disables

FAST mode and enables standard mode.

B. Connect if a stepper motor or counter is to be

connected.

Rated conditions select (

). Please refer to the SA2102D

datasheet for further information. For Fast mode,

any combination except all to +. For different

normal mode settings, refer to the SA2102D

datasheet. Note: On module + = VDD and - = VSS

“+” : FAST mode enabled. “-” or OPEN: Standard

mode enabled. Also see J10.

CLOSED: Inserting the jumper enables the pulse

stability circuitry. OPEN: Leaving it open disables

the pulse stability circuitry.

“-”

J17 for R0, J18 for R1,

J19 for R2

Bi-Directional Energy Measurement

Uni-Directional Energy Measurement

Forward

Reverse

Table 7: Jumper options for SA2102D

SA4102A

Name

J10

J11

J12

J13

J14, J15

J17, J18,

J19, J21,

J20

J23

J25

State

Set to B to enable stepper motor or counter

connectors (CON 4 and CON 5)

Rated conditions select (J17 for R0, J18 for R1,

J19 for R2, J21 for R3). Please refer to the

SA4102 datasheet for further information.

Fms (see datasheet). Leave J20 open for fast

pulse output.

Filter output select. Set to + for Averaging filter.

Set to - for Filtered instantaneous output.

Bi-Directional Energy Measurement

Uni-Directional Energy Measurement

Forward

Reverse

Table 8: Jumper options for SA4102A

PM4100APD датащи(PDF) 6 Page - Sames

PM4100APD датащи(HTML) 6 Page - Sames

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14

датащи скачать

ссылки URL