Solder reflow conditions

● Recommended reflow methods: IR, vapor phase oven, hot air oven, N2 environment for lead-free.

● Devices are not designed to be wave soldered to the bottom side of the board.

● Recommended maximum paste thickness is 0.25mm (0.010inch).

● Devices can be cleaned using standard industry methods and solvents.

● Soldering temprature profile meets RoHs leadfree process.

Notes: If reflow temperatures exceed the recommended profile, devices may not meet the

performance requirements

Recommended pad layout (mm)

Rev :

www.leiditech.com

01.06.2018

3/5

LP-MSM075/24