F39-TGR-CVL-B-10-R datasheet(93/98 Pages) OMRON

93 / 98 page

Receiver Error Codes

Section 17-5

Cascaded Sys-

tem Fault

Configuration Error

Please contact your local Omron distributor

or the European Repair Center

Second segment or mute module error

Check all cable connections. Please contact

your local Omron distributor or the Euro-

pean Repair Center

Third segment or mute module error

Check all cable connections. Please contact

your local Omron distributor or the Euro-

pean Repair Center

Fourth segment or mute module error

Check all cable connections. Please contact

your local Omron distributor or the Euro-

pean Repair Center

Mute module error

Check all cable connections to mute mod-

ule. Please contact your local Omron dis-

tributor or the European Repair Center

Configuration error

Please contact your local Omron distributor

or the European Repair Center

Second segment or mute module firmware

not compatible with first segment

Replace with compatible component or

return system to Omron distributor or Euro-

pean Repair Center

Third segment or mute module firmware not

compatible with first segment

Replace with compatible component or

return system to Omron distributor or Euro-

pean Repair Center

Fourth segment or mute module firmware

not compatible with first segment

Replace with compatible component or

return system to Omron distributor or Euro-

pean Repair Center

Mute module firmware not compatible with

first segment

Replace with compatible component or

return system to Omron distributor or Euro-

pean Repair Center

Incorrect segment type in position two,

three or four

Confirm that all segments are of the same

type; either all transmitters or receivers

Segment 2 type does not match segment 1

type

Confirm that segment 2 is the same type

(transmitter or receiver) as segment 1

Segment 3 type does not match segment 1

type

Confirm that segment 3 is the same type

(transmitter or receiver) as segment 1

Segment 4 type does not match segment 1

type

Confirm that segment 4 is the same type

(transmitter or receiver) as segment 1

Error in flex segment or muting module dur-

ing operation

Check all flex connections, segments and

muting modules

Error in segment 2 during operation

Check connections to segment 2. Replace

segment 2 with known good segment 2.

Please contact your local Omron distributor

or the European Repair Center

Error in segment 3 during operation

Check connections to segment 3. Replace

segment 3 with known good segment 3.

Please contact your local Omron distributor

or the European Repair Center

Error in segment 4 during operation

Check connections to segment 4. Replace

segment 4 with known good segment 4.

Please contact your local Omron distributor

or the European Repair Center

100

Number of segments in system has been

reduced (changed)

Segment count is less than original configu-

ration. Add required segment(s) or program

system for current configuration

101

Too many flex nodes or muting modules in

the flex bus

Make sure of total of 4 segments with only

one muting module.

Code Group

Error Code

Description of Error Code

Corrective Action Needed

F39-TGR-CVL-B-10-R датащи(PDF) 93 Page - Omron Electronics LLC

F39-TGR-CVL-B-10-R датащи(HTML) 93 Page - Omron Electronics LLC

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98

датащи скачать

ссылки URL