Introduction

www.ti.com

2

SPRUI77C – August 2016 – Revised March 2019

Submit Documentation Feedback

Copyright © 2016–2019, Texas Instruments Incorporated

LAUNCHXL-F28379D Overview

1

Supplying the LaunchPad With 3.3 V

..................................................................................... 6

2

Supplying the LaunchPad With 5 V

....................................................................................... 6

3

Positions of Signals Present on Switch S1

............................................................................... 7

4

Revision 2.0: Resistor Selection for Routing Dual-Mapped Signals

.................................................. 7

5

F28379D LaunchPad Pin Out and Pin Mux Options - J1, J3

.......................................................... 8

6

F28379D LaunchPad Pin Out and Pin Mux Options - J4, J2

.......................................................... 8

7

F28379D LaunchPad Pin Out and Pin Mux Options - J5, J7

.......................................................... 9

8

F28379D LaunchPad Pin Out and Pin Mux Options - J8, J6

.......................................................... 9

9

LAUNCHXL-F28379D Bill of Materials

.................................................................................. 20

Trademarks

C2000, LaunchPad, Delfino, Code Composer Studio are trademarks of Texas Instruments.

Windows is a registered trademark of Microsoft Corporation in the United States and/or other countries.

All other trademarks are the property of their respective owners.

1

Introduction

Users can download an unrestricted copy of the latest version of Code Composer Studio™ IDE to write,

download, and debug applications on the LAUNCHXL-F28379D board. The debugger is unobtrusive,

allowing the user to run an application at full speed with hardware breakpoints and available single step

execution while consuming no extra hardware resources.

As shown in Figure 1, the LAUNCHXL-F28379D LaunchPad features include:

•

USB debugging and programming interface via a high-speed galvanically isolated XDS100v2 debug

probe featuring a USB/UART connection

•

Superset TMS320F28379D device

•

Two user LEDs

•

Device reset pushbutton

•

Easily accessible device pins for debugging purposes or as sockets for adding customized extension

boards

•

Dual 5 V quadrature encoder interfaces

•

CAN Interface with integrated transceiver

•

Boot selection switches

•

Differential Amplifier to provide buffered signals to ADCD for 16-bit mode

•

Optional SMA connection points P/N:SMA-J-P-H-ST-EM1

•

Four Sigma Delta demodulator inputs brought to the BP headers