User manual

Please read the Important Notice and Warnings at the end of this document

Revision 1.1

www.infineon.com

1

2020-09-29

AN2019-01

EVAL-M1-IM240-A user manual

iMOTION™ modular application design kit

About this document

Scope and purpose

This application note provides an overview of the evaluation-board EVAL-M1-IM240-A including its main

features, key data, pin assignments and mechanical dimensions.

The EVAL-M1-IM240-A board is a complete evaluation board including IM240 3-phase intelligent power modules

(IPM) are designed for high-efficiency appliance motor drives such as air-conditioner fans and refrigerator

compressors. In combination with either EVAL-M1-101T or EVAL-M1-099M it features and demonstrates

Infineon’s CIPOS™ Micro IPM technology for motor drive.

The evaluation board EVAL-M1-IM240-A for intelligent power modules (IPM) was developed to support

customers during their first steps designing applications with CIPOS™ Micro power modules.

Intended audience

This application note is intended for all technical specialists working with the EVAL-M1-IM240-A board.

Important notice

Attention:

The Evaluation Boards and Reference Boards as well as the information in this document are

solely intended to support designers of applications in evaluating the use of products from

Infineon Technologies for their intended applications.

Environmental conditions have been considered in the design of the Evaluation Boards and

Reference Boards provided by Infineon Technologies. The design of the Evaluation Boards

and Reference Boards has been tested by Infineon Technologies only as described in this

document. The design is not qualified in terms of safety requirements, manufacturing and

operation over the entire operating temperature range or lifetime.

The Evaluation Boards and Reference Boards provided by Infineon Technologies are subject

to functional testing only under typical load conditions. Evaluation Boards and Reference

Boards are not subject to the same procedures as regular products regarding returned

material analysis (RMA), process change notification (PCN) and product discontinuation (PD).

Evaluation Boards and Reference Boards are not commercialized products, and are solely

intended for evaluation and testing purposes. In particular, they shall not be used for

reliability testing or production. The Evaluation Boards and Reference Boards may therefore

not comply with CE or similar standards (including but not limited to the EMC Directive

2004/EC/108 and the EMC Act) and may not fulfill other requirements of the country in which

they are operated by the customer. The customer shall ensure that all Evaluation Boards and

Reference Boards will be handled in a way which is compliant with the relevant requirements

and standards of the country in which they are operated.

The Evaluation Boards and Reference Boards as well as the information provided in this