| поискавой системы для электроныых деталей |
|
MICRF405 датащи(PDF) 37 Page - Micrel Semiconductor |
|
|
|||||||||||||||||||||||||||||
MICRF405 датащи(HTML) 37 Page - Micrel Semiconductor |
|
37 / 46 page ![]() Micrel MICRF405 April 2006 37 M9999-041906 (408) 955-1690 LDO_by LDO_EN1 LDO_EN0 Comments X 0 0 LDOs turned off, power applied to AVDD, DVDD, RFVDD, min/max is 2.0/2.5 V, and to VDD pin 11 and 1, min/max is 2.0/3.6V. 1 X X LDOs bypassed, power applied to the VDD pin1 and VDD pin11, min/max is 2.0/2.5 V 0 0 1 PA LDO turned on, power applied to VDD pin1 and 11, min/max is 2.0/3.6V, and to AVDD and DVDD, min/max is 2.0/2.5V 0 1 0 PA and AVDD LDO turned on, power applied to the VDD pin1 and 11, min/max is 2.0/3.6V, and to DVDD, min/max is 2.0/2.5V 0 1 1 PA, AVDD and DIG LDO turned on, power applied to the VDD pin1 and VDD pin 11, min/max is 2.0/3.6V Table 30. Low DropOut Voltage Regulator. PA_LDc_en Comments 0 PA is only controlled by Mode1 and Mode and PA0-2, PA on in transmit mode (Mode[1:0]=3 and PA[2:0]>0) 1 In transmit mode, PA is turned on by Lock Detect (LD=1 -> PA on). PA is turned off by load pulse or when using openloop modulation and setting the DATAIN pin in tri-state. PA will be turned on again once LD goes high again. LD_en must be set to 1. Table 31. Lock Detect Controlled PA. MOD_LDc_en Comments 0 Modulation starts once frame length is written into data byte. 1 Modulation starts once frame length is written into data byte and PA is turned on and LD is high. Table 32. Lock Detect Controlled Start of Modulation (only for BIT_IO_en=0). PA_FEc_en Comments 0 PA is turned off by Mode1 and Mode0 or PA0-2 and PA_LDc_en=0 1 PA is turned off immediately after the frame is transmitted. Table 33. Frameend Controlled PA. LD_en State Comments 0 LD off Output is 0 volt, or test signals specified by OUTS[2:0] 1 LD on LD pin high indicate that the PLL is locked Table 34. Lock Detector. SyncID_Len1 SyncID_Len0 Comments 0 0 SyncID length is 1 byte. SyncID0 is sent 0 1 SyncID length is 2 bytes. SyncID0 and SyncID1 is sent 1 0 SyncID length is 3 bytes. SyncID0, SyncID1 and SyncID2 is sent 1 1 SyncID length is 4 bytes. SyncID0, SyncID1, SyncID2 and SyncID3 is sent. Table 35. SyncID Field Length. |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |