Hand Crimp Tool for 1.8mm SLD WTW Crimp Terminals

Doc. No: 2002180400

Release Date: 01-08-18

UNCONTROLLED COPY

Page 5 of 7

Revision: A

Revision Date: 01-08-18

Warranty

This tool is for electrical terminal crimping purposes only. This tool is made of the best quality

materials. All vital components are long-life tested. All tools are warranted to be free of

manufacturing defects for a period of 30 days. Should such a defect occur, Molex will repair or

exchange the tool free of charge. This repair or exchange will not be applicable to altered, misused

or damaged tools. This tool is designed for hand use only. Any clamping, fixturing or use of handle

extensions voids this warranty.

CAUTION: Molex crimp specifications are valid only when used with Molex terminals and tooling.

CAUTIONS:

intended for production use. Repetitive use of this tool should be avoided.

2. Insulated rubber handles are not protection against electrical shock.

3. Wear eye protection at all times.

4. Use only the Molex terminals specified for crimping with this tool.

Notes

1. This tool should only be used for the terminals and wire gauges specified on this sheet.

2. This tool is not adjustable for crimp height. Variations in tools, terminals, wire stranding and

insulation types may affect crimp height.

3. This tool is intended for standard conductor sizes. It may not give good insulation crimp support

for all insulation sizes.

4. Molex does not repair hand tools (see warranty above). The replacement parts listed are the

only parts available for repair. If the handles or crimp tooling are damaged or worn, a new tool

must be purchased.

5. Pull force should be used as the final criterion for an acceptable crimp. Pull force is measured

with no influence from the insulation crimp. The insulation should be stripped long (1/2 in.) so

the insulation grips on the terminal do not grip the wire insulation or the conductor. Refer to

Molex Quality Crimping Handbook 63800-0029 for additional information on crimping and crimp

testing.

6. Molex does not certify crimp hand tools.

CAUTION: Molex crimp specifications are valid only when used with Molex terminals and tooling.