1161 Ringwood Ct, #110, San Jose, CA 95131, U. S. A. Tel.: (408) 748-9100, Fax: (408) 770-9187

www.analogtechnologies.com

Copyrights 2000-2022, Analog Technologies, Inc. All Rights Reserved. Updated on 1/29/2022

Email: staff@analogti.com/sales@analogti.com

2

Analog Technologies

ATTP2

Temperature Plate Assembly

MAIN FEATURES

Input voltage: 110-220VAC

7-inch Touch Screen

Parameters Setting

Long Life High Temperature TEC

Bidirectional Temperature Control

Temperature Cycle Control

Overcurrent, Overvoltage and Overheat Protection

Over-temperature and Under-temperature Protection

Circuit

Large Platform for Thermal Load:

314.8mm(L)×315mm(W)×152mm(H)

Wide Temperature Regulation Range: −10°C to 110°C

Temperature Accuracy: 0.1°C

100 % Lead (Pb)-free and RoHS Compliant

APPLICATIONS

It's widely used for temperature control in industry,

medical care, scientific research, etc.

DESCRIPTION

ATTP2 is a high performance temperature control air-

cooling system specially designed for providing the target

object with a high temperature or low temperature

environment of a certain temperature, or for cycle control

of heating and cooling, etc. The output load is TEC module,

which can heat up or cool down objects with high precision,

long life time and without noise, wear, vibration and

pollution. The TEC controller TEC28V15A drives four

high temperature and long life TECs for temperature

control. This temperature plate assembly comes with a 7-

inch touch screen and parameter setting programs, which

can be used for controlling the temperature of the target

object according to specific needs.

Note: The platform is made of 6063 aluminum alloy. The

material, size and shape of the platform and the

specifications of the TEC module can be customized.

OPERATING PRINCIPLE

1. When powering on, the screen will display the platform

temperature, TEC voltage and current, etc.

2. On the screen, there are programs for setting parameters.

For example, in the heating and cooling program, set the

upper temperature limit to 90°C with a stabilization time of

10 seconds and the lower temperature limit to 20°C with a

stabilization time of 15 seconds, and repeat such cycle for

50 times.

Figure 6. Mechanical Dimensions