LPC2101_02_03_1

© Koninklijke Philips Electronics N.V. 2006. All rights reserved.

Preliminary data sheet

Rev. 01 — 18 January 2006

21 of 32

Philips Semiconductors

LPC2101/2102/2103

Single-chip 16-bit/32-bit microcontrollers

7.

Limiting values

[1]

The following applies to the Limiting values:

a) This product includes circuitry specifically designed for the protection of its internal devices from the damaging effects of excessive

static charge. Nonetheless, it is suggested that conventional precautions be taken to avoid applying greater than the rated maximum.

otherwise noted.

[2]

Core and internal rail.

[3]

External rail.

[4]

On ADC related pins.

[5]

Including voltage on outputs in 3-state mode.

[6]

[7]

Not to exceed 4.6 V.

[8]

Per supply pin.

[9]

The peak current is limited to 25 times the corresponding maximum current.

[10] Per ground pin.

[11] Dependent on package type.

Table 4:

Limiting values

In accordance with the Absolute Maximum Rating System (IEC 60134). [1]

Symbol

Parameter

Conditions

Min

Max

Unit

supply voltage (1.8 V)

[2]

−0.5

+2.5

V

supply voltage (3.3 V)

[3]

−0.5

+3.6

V

analog 3.3 V pad supply voltage

−0.5

4.6

V

input voltage on pin VBAT

for the RTC

−0.5

4.6

V

analog input voltage

[4]

−0.5

5.1

V

input voltage

5 V tolerant I/O

pins

[5] [6]

−0.5

6.0

V

other I/O pins

[5]

−0.5

supply current

[8] -

100 [9]

mA

ground current

[10] -

100 [9]

mA

storage temperature

[11]

−40

125

°C

total power dissipation (per package)

based on package

heat transfer, not

device power

consumption

-

1.5

W