Technical Data

Power

Indicators/settings

LED indication

Power LED (P) green: OFF in case of loss of 24 V or 12 V or 5 V

Directive conformity

Electromagnetic compatibility

Directive 2014/30/EU

EN 61326-1:2013

Conformity

Electromagnetic compatibility

NE 21

Degree of protection

IEC 60529

Environmental test

EN 60068-2-14

Shock resistance

EN 60068-2-27

Vibration resistance

EN 60068-2-6

Damaging gas

EN 60068-2-42

Relative humidity

EN 60068-2-78

Ambient conditions

Ambient temperature

-40 ... 60 °C (-40 ... 140 °F) , 70 °C (non-Ex)

Storage temperature

-40 ... 85 °C (-40 ... 185 °F)

Relative humidity

95 % non-condensing

Shock resistance

shock type I, shock duration 11 ms, shock amplitude 15 g, number of shocks 18

Vibration resistance

frequency range 10 ... 150 Hz; transition frequency: 57.56 Hz, amplitude/acceleration

± 0.075 mm/1 g; 10 cycles

frequency range 5 ... 100 Hz; transition frequency: 13.2 Hz amplitude/acceleration ± 1

mm/0.7 g; 90 minutes at each resonance

Damaging gas

designed for operation in environmental conditions acc. to ISA-S71.04-1985, severity

level G3

Mechanical specifications

Degree of protection

IP20 (module) , mounted on backplane

Mass

approx. 220 g

Dimensions

32.5 x 100 x 102 mm (1.28 x 3.9 x 4 inch)

Data for application in connection with hazardous areas

Certificate

PF 08 CERT 1234 X

Marking

1

II 3 G Ex nA IIC T4 Gc

Galvanic isolation

Output/power supply, internal bus

EN 60950-1 (Safety requirement: < 60 V, external supply SELV/PELV)

Directive conformity

Directive 2014/34/EU

EN IEC 60079-0:2018+AC:2020

EN 60079-15:2010

International approvals

UL approval

E106378

IECEx approval

BVS 09.0037X

Approved for

Ex nA IIC T4 Gc

General information

System information

The module has to be mounted in appropriate backplanes (LB9***) in Zone 2 or

outside hazardous areas. Here, observe the corresponding declaration of conformity.

For use in hazardous areas (e. g. Zone 2, Zone 22 or Div. 2) the module must be

installed in an appropriate enclosure.

Supplementary information

EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity,

Attestation of Conformity and instructions have to be observed where applicable. For

information see www.pepperl-fuchs.com.

Power supply

LB9006C

2

Germany: +49 621 776 2222

Pepperl+Fuchs Group

Refer to "General Notes Relating to Pepperl+Fuchs Product Information".

USA: +1 330 486 0002

Singapore: +65 6779 9091

www.pepperl-fuchs.com

pa-info@us.pepperl-fuchs.com

pa-info@sg.pepperl-fuchs.com

pa-info@de.pepperl-fuchs.com