©2021 Advanced Linear Devices, Inc., Vers. 1.2

www.aldinc.com

1 of 9

GENERAL DESCRIPTION

ALD310700A/ALD310700 high precision monolithic quad P-Channel

MOSFET arrays are matched at the factory using ALD's proven EPAD

®

CMOS technology. This device is available in a quad version and is a

member of the EPAD

®

Matched Pair MOSFET Family. The

ALD310700A/ALD310700 is a P-channel version of the popular

ALD110800A/ALD110800 Precision Threshold device. Together, these

two MOSFET series enable complementary precision N-Channel and P-

Channel MOSFET array based circuits.

Intended for low voltage and low power small signal applications, the

ALD310700A/ALD310700 features precision 0.00V Zero Threshold

Voltage, which enables circuit designs with very low operating voltages

such as < +0.5V power supplies where the circuits operate below the

threshold voltage of the ALD310700A/ALD310700. This feature also

enhances input/output signal operating ranges, especially in very low

operating voltage environments. With these low threshold precision

devices, a circuit with multiple cascading stages can be constructed to

operate at extremely low supply or bias voltage levels. ALD310700A/

ALD310700A/ALD310700 MOSFETs are designed for exceptional

matching of device electrical characteristics. The Gate Threshold Voltage

voltage of only +/-0.001V (1mV). As these devices are on the same

monolithic chip, they also exhibit excellent temperature tracking

characteristics. They are versatile design components for a broad range

of precision analog applications such as basic building blocks for current

mirrors, matching circuits, current sources, differential amplifier input

stages, transmission gates, and multiplexers. These devices also excel

in limited operating voltage applications such as very low level precision

voltage-clamps. In addition to matched pair electrical characteristics,

each individual MOSFET exhibits individual well controlled manufacturing

characteristics, enabling the user to depend on tight design limits from

different production batches.

(Continued on next page)

APPLICATIONS

• 0.5% precision current mirrors and current sources

• Low Tempco (<= 50ppm/°C) current mirrors/sources

• Energy harvesting circuits

• Very low voltage analog and digital circuits

• Backup battery circuits & power failure detectors

• Precision low level voltage-clamps

• Low level zero-crossing detector

• Source followers and buffers

• Precision capacitive probes and sensor interfaces

• Precision charge detectors and charge integrators

• Discrete differential amplifier input stage

• Peak-detectors and level-shifters

• High-side switches and Sample-and-Hold switches

• Precision current multipliers

• Discrete analog switches / multiplexers

• Discrete voltage comparators

FEATURES & BENEFITS

• Precision matched Gate Threshold Voltages

ALD310700A: 1mV typical

ALD310700: 2mV typical

• Sub-threshold voltage operation

• Low min. operating voltage of less than 0.2V

• Ultra low min. operating current of less than 1nA

• Nano-power operation

• Wide dynamic operating current ranges

• Exponential operating current ranges

• Matched transconductance and output conductance

• Matched and tracked temperature characteristics

• Tight lot-to-lot parametric control

• Low input capacitance

• Low input/output leakage currents

*Contact factory for industrial temp. range or user-specified threshold voltage values.

Operating Temperature Range *

0°C to +70°C

16-Pin SOIC Package

16-Pin Plastic Dip Package

ALD310700ASCL

ALD310700APCL

ALD310700SCL

ALD310700PCL

PIN CONFIGURATION

ALD310700

*IC pins are internally connected, connect to V-

SCL, PCL PACKAGES

BLOCK DIAGRAM

e

EPAD

TM

®

N A

B L

E D

E

ALD310700A/ALD310700

DP2

GP2

SP2

GP3

SP3

GP1

SP1

DP4

GP4

2

3

4

5

6

7

8

9

10

11

12

13

14

DP1

DP3

SP4

1

15

16

IC1*

IC2*

M1

M2

M4

M3

DP1 (2)

DP2 (15)

GP1 (3)

SP1 (4)

SP2 (13)

V+ (12)

GP2 (14)

DP3 (11)

DP4 (6)

SP3 (9)

SP4 (8)

~

V- (5)

V+ (12)

GP4 (7)

IC1 (1)

V-

IC2 (16)

GP3 (10)

V-

VGS(th)= 0.00V

QUAD ZERO THRESHOLD™ MATCHED PAIR