1

Power Entry Modules with Line Filter

KFS

https://www.schurter.com /PG06

EMC Products

IEC Appliance Inlet C14 with Filter

See below:

Approvals and Compliances

C14

70° C

Description

- Panel mount :

Screw-on mounting front side

- 2 Functions :

Appliance Inlet Protection class I , Line-filter in standard version

- Quick connect terminals 6.3 x 0.8 mm

Characteristics

- Compact design with optimal shielding

- All single elements are already wired

- Universal line filter for standard applications

- For applications according IEC/UL 62368-1 we recommend variants

with bleed resistor

References

We recommend for new applications the type 5120

Weblinks

pdf data sheet, html datasheet, General Product Information, Approvals,

Distributor-Stock-Check, Accessories, Detailed request for product

Newly available variants corresponding to V-Lock mating cordset. The connector is equipped with a notch intended for use with the latching cordset.

The cord latching system prevents against accidental removal of the cordset.

Technical Data

Ratings IEC

1 - 10 A @ Ta 40 °C / 250 VAC; 50 Hz

Ratings UL/CSA

1 - 10 A @ Ta 40 °C / 250 VAC; 60 Hz

Leakage Current

standard < 0.5 mA (250 V / 60 Hz)

Dielectric Strength

> 1.7 kVDC between L-N

> 2.7 kVDC between L/N-PE

Test voltage (2 sec)

Impulse Withstand Voltage

> 2.5 kV between L-N (CX2)

> 5 kV between L/N-PE

Allowable Operation Tempe-

rature

-25 °C to 85 °C

Climatic Category

25/085/21 acc. to IEC 60068-1

IP-Protection

front side IP40 acc. to IEC 60529

Protection Class

Suitable for appliances with protection

class I acc. to IEC 61140

Terminal

Quick connect terminals 6.3 x 0.8 mm

Panel Thickness S

Screw: max 8 mm

Mounting screw torque max 0.5 Nm

Material: Housing

Thermoplastic, black, UL 94V-0

Appliance inlet/-outlet

C14 acc. to IEC 60320-1,

UL 498, CSA C22.2 no. 42 (for cold

conditions) pin-temperature 70 °C, 10 A,

Protection Class I

Line Filter

Standard version, IEC 60939, UL 1283,

CSA C22.2 no. 8

Technical Details

MTBF

> 3'100'000 h acc. to MIL-HB-217 F

Approvals and Compliances

Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about

Approvals

SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national

and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF

16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agree-

ments by SCHURTER.