STM32F071X8_V01 datasheet(24/122 Pages) STMICROELECTRONICS

24 / 122 page

Functional overview

STM32F071x8 STM32F071xB

24/122

DS10009 Rev 7

The RTC is an independent BCD timer/counter. Its main features are the following:

•

calendar with subseconds, seconds, minutes, hours (12 or 24 format), week day, date,

month, year, in BCD (binary-coded decimal) format

•

automatic correction for 28, 29 (leap year), 30, and 31 day of the month

•

programmable alarm with wake up from Stop and Standby mode capability

•

Periodic wakeup unit with programmable resolution and period.

•

on-the-fly correction from 1 to 32767 RTC clock pulses. This can be used to

synchronize the RTC with a master clock

•

digital calibration circuit with 1 ppm resolution, to compensate for quartz crystal

inaccuracy

•

Three anti-tamper detection pins with programmable filter. The MCU can be woken up

from Stop and Standby modes on tamper event detection

•

timestamp feature which can be used to save the calendar content. This function can

be triggered by an event on the timestamp pin, or by a tamper event. The MCU can be

woken up from Stop and Standby modes on timestamp event detection

•

reference clock detection: a more precise second source clock (50 or 60 Hz) can be

used to enhance the calendar precision

The RTC clock sources can be:

•

a 32.768 kHz external crystal

•

a resonator or oscillator

•

the internal low-power RC oscillator (typical frequency of 40 kHz)

•

the high-speed external clock divided by 32

3.16

Inter-integrated circuit interface (I2C)

Up to two I2C interfaces (I2C1 and I2C2) can operate in multimaster or slave modes. Both

can support Standard mode (up to 100 kbit/s), Fast mode (up to 400 kbit/s) and Fast Mode

Plus (up to 1 Mbit/s) with 20 mA output drive on most of the associated I/Os.

Both support 7-bit and 10-bit addressing modes, multiple 7-bit slave addresses (two

addresses, one with configurable mask). They also include programmable analog and

digital noise filters.

In addition, I2C1 provides hardware support for SMBUS 2.0 and PMBUS 1.1: ARP

capability, Host notify protocol, hardware CRC (PEC) generation/verification, timeouts

Table 8. Comparison of I2C analog and digital filters

Aspect

Analog filter

Digital filter

Pulse width of

suppressed spikes

≥ 50 ns

Programmable length from 1 to 15

I2Cx peripheral clocks

Benefits

Available in Stop mode

–Extra filtering capability vs.

standard requirements

–Stable length

Drawbacks

Variations depending on

temperature, voltage, process

Wakeup from Stop on address

match is not available when digital

filter is enabled.

STM32F071X8 датащи(PDF) 24 Page - STMicroelectronics

STM32F071X8 датащи(HTML) 24 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

датащи скачать

ссылки URL