SN74HCS32DYYR datasheet(12/31 Pages) TI

номер детали	SN74HCS32DYYR

подробное описание детали	SN74HCS32 Quadruple 2-Input OR Gates with Schmitt-Trigger Inputs

PDF	31 Pages

Scroll/Zoom	100%

производитель	TI [Texas Instruments]

домашняя страница	http://www.ti.com

Logo

12 / 31 page

9.2.2 Detailed Design Procedure

1. Add a decoupling capacitor from VCC to GND. The capacitor needs to be placed physically close to the

device and electrically close to both the VCC and GND pins. An example layout is shown in the Layout

section.

2. Ensure the capacitive load at the output is ≤ 50 pF. This is not a hard limit, however it will ensure optimal

performance. This can be accomplished by providing short, appropriately sized traces from the SN74HCS32

to the receiving device(s).

3. Ensure the resistive load at the output is larger than (VCC / IO(max)) Ω. This will ensure that the maximum

output current from the Absolute Maximum Ratings is not violated. Most CMOS inputs have a resistive load

measured in megaohms; much larger than the minimum calculated above.

4. Thermal issues are rarely a concern for logic gates, however the power consumption and thermal increase

can be calculated using the steps provided in the application report, CMOS Power Consumption and Cpd

Calculation.

9.2.3 Application Curves

Device 1

Device 2

Device 3

Device 4

Figure 9-2. Application timing diagram

SN74HCS32

SCLS781C – JANUARY 2020 – REVISED DECEMBER 2021

www.ti.com

Submit Document Feedback

Product Folder Links: SN74HCS32

SN74HCS32DYYR датащи(PDF) 12 Page - Texas Instruments