STM8S103F2 datasheet(118/121 Pages) STMICROELECTRONICS

118 / 121 page

Revision history

STM8S103F2 STM8S103F3 STM8S103K3

118/121

DocID15441 Rev 14

09-Sep-2010

Removed VFQFPN32 package.

Removed internal reference voltage from Section 4.13: Analog-to-

digital converter (ADC1).

Updated the reset state information in Table 4: Legend/abbreviations

for pin description tables in Section 5: Pinout and pin description.

Added footnote to PD1/SWIM pin in Table 5: STM8S103K3 pin

descriptions.

Updated pins 14 and 19 (TSSOP20/SO20) / pins 11 and 16

(UFQFPN20) in Table 6: STM8S103F2 and STM8S103F3 pin

descriptions.

Standardized all reset state values; updated the reset state values of

the RST_SR, CLK_SWCR, CLK_HSITRIMR, CLK_SWIMCCR,

IWDG_KR, and ADC_DRx registers in Table 8: General hardware

Updated AFR2 description of OPT 2 in Table 14: STM8S103Fx

alternate function remapping bits for 20-pin devicess.

Replaced 0.01 µF with 0.1 µf in Figure 38: Recommended reset pin

protection.

Added Figure 42: Typical application with I2C bus and timing diagram

and Table 44: I2C characteristics.

Updated footnote 1 in Table 46: ADC accuracy with RAIN< 10 kΩ,

VDD= 5 V and Table 47: ADC accuracy with RAIN< 10 kΩ, VDD= 3.3 V.

Updated the Special marking section in Section 13.1: STM8S103

FASTROM microcontroller option list:

Updated AFR2 description of OTP2 in Table 14: STM8S103Fx

alternate function remapping bits for 20-pin devices

Updated existing footnote and added three additional footnotes to

Table 53: UFQFPN32 - 32-pin, 5x5 mm, 0.5 mm pitch ultra thin fine

pitch quad flat package mechanical data

12-Jul-2011

Updated the note related to true open-drain outputs in Table 6:

STM8S103F2 and STM8S103F3 pin descriptions

Removed CLK_CANCCR register from Table 8: General hardware

Added note for Px_IDR registers in Table 7: I/O port hardware register

map.

Added recommendation concerning NRST pin level, and power

consumption sensitive applications, above Figure 38: Recommended

reset pin protection.

Removed typical HSI accuracy curve in Section 10.3.4: Internal clock

sources and timing characteristics.

Renamed package type 2 into package pitch and added pitch code

“C” in Figure 63: STM8S103F2/x3 access line ordering information

scheme(1) and added UFQFPN20 in Section 13.1: STM8S103

FASTROM microcontroller option list.

Updated the disclaimer.

Table 59. Document revision history

Date

Revision

Changes

STM8S103F2 датащи(PDF) 118 Page - STMicroelectronics

STM8S103F2 датащи(HTML) 118 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

датащи скачать

ссылки URL