 |
поискавой системы для электроныых деталей |
|
|
поискавой системы для электроныых деталей |
|
LTC3613 датащи(PDF) 13 Page - Analog Devices |
|
|
|||||||||||||||||||||||||||||
LTC3613 датащи(HTML) 13 Page - Analog Devices |
|
|
13 / 44 page  LTC7131-1 13 Rev. 0 For more information www.analog.com OPERATION Table 1. LTC7131-1 Supported PMBus Commands PMBUS COMMAND CODE COMMAND NAME PMBUS-DEFINED SMBUS TRANSACTION TYPE SCALING DATA BYTES DESCRIPTION 0x01 OPERATION R/W Byte 1 On/Off Command and Set Output to MFR_VOUT_ MARGIN_HIGH or MFR_VOUT_MARGIN_LOW value 0x20 VOUT_MODE Read Byte 1 or 2 Read Data Format for MFR_VOUT_COMMAND Hard-wired to VID format (0x3E), not writable 0x79 STATUS_WORD R/W Word 2 Read Fault Status: Communication fault, PGOOD, VIN UV, VOUT OV, overtemperature, VIN fault, VOUT fault Individual faults are reset by writing a '1' to the bit position of the fault to be reset 0x88 READ_VIN R Word 4mV/Bit 2 Read VIN 0x89 READ_IIN R Word 10mA/Bit 2 Read IIN 0x8B READ_VOUT R Word 0.5mV/Bit 2 Read VOUT 0x8C READ_IOUT R Word 10mA/Bit 2 Read IOUT 0x8D READ_TEMPERATURE_1 R Word 1°C/Bit 2 Read Die Temperature (°C) 0x98 PMBUS_REVISION Read Byte 1 or 2 Read PMBus Revision = 0x22 for Rev 1.2 0xD7 MFR_IOUT_PEAK R/W Word 10mA/Bit 2 Read highest output current observed since last restart Write will restart peak monitor routine 0xDD MFR_VOUT_PEAK R/W Word 0.5mV/Bit 2 Read highest output voltage observed since last restart Write will restart peak monitor routine 0xDE MFR_VIN_PEAK R/W Word 4mV/Bit 2 Read highest input voltage observed since last restart Write will restart peak monitor routine 0xDF MFR_TEMPERATURE1_ PEAK R/W Word 1°C/Bit 2 Read highest temperature observed since last restart Write will restart peak monitor routine 0xE1 MFR_IIN_PEAK R/W Word 10mA/Bit 2 Read highest input current observed since last restart Write will restart peak monitor routine 0xE3 MFR_CLEAR_PEAKS W Byte 0, 1 or 2 Clear all peak values, write data is ignored 0xE5 MFR_VOUT_MARGIN_HIGH R/W Word 0.1%/Bit 2 Same format as MFR_VOUT_COMMAND 0xE7 MFR_SPECIAL_ID R Word 2 Read 16-bit value (0x40E0) that GUI will recognize as LTC7131-1 0xE8 MFR_VOUT_COMMAND R/W Word 0.1%/Bit 2 VOUT Margining Command ±25% range at 0.1%/bit in 2's compliment. Defaults to 0% at power-up 0xED MFR_VOUT_MARGIN_LOW R/W Word 0.1%/Bit 2 Same format as MFR_VOUT_COMMAND 0xFA MFR_RAIL_ADDRESS R/W Byte 1 or 2 Set Common PMBus Address (B6-B0), Clear B7 to enable. Set B7 to disable. Valid addresses are 0x00 to 0x7F. 0xFD MFR_RESET W Byte 0, 1 or 2 Reset PMBus Interface and ADC to Power-On State Write data is ignored 0xE9 MFR_FAULT_RESPONSE R/W Byte 1 or 2 Set response to overvoltage and overcurrent faults: (ignore and retry). |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Russian ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
