For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824

Phone: 978-250-3343

Fax: 978-250-3373

Order On-line at www.hittite.com

Application Support: Phone: 978-250-3343 or apps@hittite.com

6

6 - 6

Outline Drawing

part number

package Body material

lead finish

msl rating

HmC750lp4

low stress injection molded plastic

sn/pb solder

msl1

[1]

H750

XXXX

HmC750lp4e

roHs-compliant low stress injection molded plastic

100% matte sn

msl1

[2]

H750

XXXX

[1] max peak reflow temperature of 235 °C

[2] max peak reflow temperature of 260 °C

[3] 4-Digit lot number XXXX

Package Information

nOtes:

1. leaDframe material: COpper allOY

2. DimensiOns are in inCHes [millimeters].

3. leaD spaCing tOleranCe is nOn-CUmUlatiVe

4. paD BUrr lengtH sHall Be 0.15mm maXimUm.

paD BUrr HeigHt sHall Be 0.05mm maXimUm.

5. paCKage Warp sHall nOt eXCeeD 0.05mm.

6. all grOUnD leaDs anD grOUnD paDDle mUst Be sOlDereD tO pCB rf grOUnD.

7. refer tO HmC appliCatiOn nOte fOr sUggesteD pCB lanD pattern.

HMC750LP4 / 750LP4E

v03.0111

12.5 Gbps LIMITING AMPLIFIER

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other

rights of third parties that may result from its use. Specifications subject to change without notice. No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarks and registered trademarks are the property of their respective owners.

For price, delivery, and to place orders: Analog Devices, Inc.,

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106

Phone: 781-329-4700 • Order online at www.analog.com

Application Support: Phone: 1-800-ANALOG-D