https://www.phoenixcontact.com/pi/products/1440708

12/17/2018   Page 1 / 4

Flush-type connector - SACC-CI-M12FSD-4CON-L90 - 1440708

Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's

documentation. Our General Terms of Use for Downloads are valid

(http://phoenixcontact.com/download)

Sensor/actuator flush-type connector, socket, 4-pos., D-coded, with angled solder connection, contact insert

only

Your advantages

 Reduced mounting costs thanks to two-piece device connector

 All common pin assignments and codings available

 Easy device integration thanks to mechanical port screw connections with threaded attachment, press-in contour or direct integration in the front

plate

 Additional gasket for the device when not plugged in

Key Commercial Data

Packing unit

20 pc

GTIN

GTIN

4046356509077

Technical data

Ambient conditions

Ambient temperature (operation)

-25 °C ... 85 °C (Plug / socket)

-40 °C ... 85 °C (without mechanical actuation)

Degree of protection

IP67

General

Note

The electrical and mechanical data specified assume that the connector

pair is correctly locked and mounted. If the connector is unlocked and if

there is a danger of contamination, the connector must be sealed using

a protective cap > IP54. Influences arising from litz wires, cables or PCB

assembly must also be taken into consideration.

Rated current at 40°C

4 A

Rated voltage

250 V

Rated surge voltage

2.5 kV

Number of positions

4