1

Power entry modules without line filter

GSF2

https://www.schurter.com /PG05

Connectors

IEC Appliance Inlet C14 with Fuseholder 1- or 2-pole

Snap-in version

See below:

Approvals and Compliances

C14

70° C

C18

70° C

Description

- Panel mount :

Snap-in version front side

- 2 Functions :

Appliance Inlet protection class I or II , Fuseholder for fuse-links

5 x 20 mm on the rear-side 1- or 2-pole

- Meets the requirements of IEC 60335-1 for appliances in unattended

use. This includes the enhanced requirements of glow wire tests acc.

to IEC 60695-2-11 or -12 &-13.

Characteristics

- Two "locking" snappers reinforce connector against repeated or exces-

sive pull out force during plug removal

- All single elements are already wired

- Fuseholder on the inside of the equipment prevents accidental use of

incorrect fuse-links by the user

- Suitable for use in equipment according to IEC/UL 62368-1

Other versions on request

- Ground terminal, solder/quick-connect, 90° to connector axis

Weblinks

pdf data sheet, html datasheet, General Product Information, Approvals,

Distributor-Stock-Check, Accessories, Detailed request for product

Newly available variants corresponding to V-Lock mating cordset. The connector is equipped with a notch intended for use with the latching cordset.

The cord latching system prevents against accidental removal of the cordset.

Technical Data

Ratings IEC

10 A / 250 VAC; 50 Hz

Ratings UL/CSA

10 A / 125 VAC; 60 Hz

Dielectric Strength

> 2.2 kVAC between L-N

> 3 kVAC between L/N-PE

(1 min/50 Hz)

Allowable Operation Tempe-

rature

-25 °C to 70 °C

IP-Protection

front side IP40 acc. to IEC 60529

Protection against electric

shock

Suitable for appliances with protection

class I or II acc. to IEC 61140

Terminal

Quick connect terminals 4.8 x 0.8 mm

, Ground terminal: Solder / Quick Con-

nect tin-plated

Solder terminal on request

Panel Thickness S

Snap-in: 1/1.2/1.5/2/2.5/3 mm

(other on request) (all steps with one

variant)

Material: Housing

Thermoplastic, black, UL 94V-0

Appliance inlet/-outlet

C14 / C18 acc. to IEC 60320-1,

UL 498, CSA C22.2 no. 42 (for cold

conditions) pin-temperature 70 °C, 10 A,

Protection Class I or II

Fuseholder

1-/2-pole, Shocksafe category PC2

acc. to IEC 60127-6,

for fuse-links 5 x 20 mm

Rated Power Acceptance @

Ta 23 °C

5 x 20: 3.15 W (1 pole)/ 2.5 W (2-pole)

per pole

Power Acceptance @ Ta >

23°C

Admissible power acceptance at higher

ambient temperature see derating cur-

ves

Approvals and Compliances

Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about

Approvals

SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national

and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF

16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agree-

ments by SCHURTER.