Kit Includes:

• Large Piezo Vibration Sensor - With Mass - A flexible film able to sense for

vibration, touch, shock, etc. When the film moves back and forth an AC wave is

created, with a voltage of up to ±90.

• Reed Switch - Senses magnetic fields, makes for a great non-contact switch.

• 0.25" Magnet Square - Plays nicely with the reed switch. Embed the magnet

into stuffed animals or inside a box to create a hidden actuator to the reed

switch.

• 0.5" Force Sensitive Resistor - A force-sensing resistor with a 0.5" diameter

sensing area. Great for sensing pressure (i.e., if it’s being squeezed).

• PIR Motion Sensor - Easy-to-use motion detector with an analog interface.

Power it with 5-12VDC, and you’ll be alerted of any movement.

• Mini Photocell - The photocell will vary its resistance based on how much light

it’s exposed to. Will vary from 1kΩ in the light to 10kΩ in the dark.

• QRD1114 Optical Detector/Phototransistor - An all-in-one infrared emitter and

detector. Ideal for sensing black-to-white transitions or can be used to detect

nearby objects.

• Altitude/Pressure Sensor - MPL3115A2 Breakout - Low-power, high-precision

barometric pressure sensor with I C output.

• Flex Sensor - As the sensor is flexed, the resistance across the sensor

increases. Useful for sensing motion or positioning

• SoftPot - These are very thin variable potentiometers. By pressing on various

positions along the strip, you vary the resistance.

• 9 Degrees of Freedom IMU Breakout - LSM9DS1 - This chip provides a 3-axis

accelerometer, 3-axis gyroscope, and 3-axis magnetometer. Connect this

board over I C or SPI and get started using one of the three sensors or using

all three together to determine 3D orientation.

• RGB and Gesture Sensor - APDS-9960 - This board does a little bit of

everything. You can measure ambient light or color as well as detect proximity

and do gesture sensing all over I C.

• Humidity and Temperature Sensor - Si7021 - A tiny (0.6"x0.6") board that will

provide humidity readings as well as very accurate temperature readings. This

I C board is great for weather applications.

• Soil Moisture Sensor (with screw terminals) - Ever wonder if your plant needs

water? This sensor outputs an analog signal based on the resistance of the

soil. Since water is conductive, the soil water content will be reflected in the soil

resistance.

• Capacitive Touch Breakout - This little board acts great as a non-mechanical

button. Use the pad on the board or connect your own input for a great touch

button with no moving parts.

• Sound Detector - Ever need to know if there is noise in an area? This board will

not only tell you, but it will also output amplitude as well as the full audio signal.

• IR Receiver Diode - This simple IR receiver will detect an IR signal coming

from a standard IR remote control or the IR diode included in the kit.

• IR Diode - This LED can handle up to 50mA of current and outputs in the 940-

950nm IR spectrum. Use to send signal to talk to the included IR receiver diode

or just turn off your neighbor’s TV.

• Resistor 10K Ohm 1/6th Watt PTH - 20 Pack - 1/6th Watt, +/- 5% tolerance

PTH resistors. Commonly used in breadboards and perf boards, these 10KΩ

resistors make excellent pullups, pulldowns and current limiters.

• Resistor 1.0M Ohm ¼ Watt PTH - Two ¼th Watt, +/- 5% tolerance PTH

resistors. Commonly used in breadboards and perf boards

• Resistor 330 Ohm 1/6W PTH - 20 pack - 1/6 Watt +/- 5% tolerance PTH

resistors. Commonly used in breadboards and perf boards, these 330Ω

resistors make excellent current-limiting resistors for LEDs.

2

2

2

2

Page 2 of 2

5/10/2016

https://www.sparkfun.com/products/13754