The SA Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by

lightning and other transient voltage events.

Axial Leaded - 500W > SA5.0~180CA Series

Transient Voltage Suppressors Diodes

Features

DO-15

unit:inch(mm)

• Halogen-free

• Rohs compliant

• Typical maximum temperature coefficient

• Glass passivated Chip junction in DO-15 package

• 500W peak pulse capadility at 10×1000μs waveform, repetition

rate(duty cycles):0.01%

• Fast response time:typically less than 1.0ps from 0 Volts to BV

min

• Excellent clamping capability

• Low incremental surge resistance

• High temperature soldering guaranteed: 260°C/40 seconds /

0.375”,

• (9.5mm) lead length, 5lbs., (2.3kg) tension

• Plastic package has underwriters laboratory flammability

classification 94v-0

Applications

telecom,computer, industrial and consumer electronic applications.

TVS 01

Rating

Symbol

Value

Units

Peak Pulse Power Dissipation by 10x1000μs test

waveform (Fig.1)(Note 1)

P

PPM

500

Watts

Steady State Power Dissipation on

inifinite heat sink at TL=75°C (Fig. 5)

3

Watts

Peak Forward Surge Current, 8.3ms Single Half

Sine Wave Unidirectional only (Note 2)

70

Amps

Maximum Instantaneous Forward Voltage at 25A for

Unidirectional only (Note 3)

3.5/5.0

V

Operating junction and Storage Temperature Range.

-55 to 175

°C

Typical Thermal Resistance Junction to Lead

20

°C/W

Typical Thermal Resistance Junction

to Ambient

75

°C/W

Operating junction and Storage Temperature Range.

-55°C to +175°C

°C

Notes:

2. Measured on 8.3ms single half sine wave or equivalent square wave, duty cycle=4 per minute maximum.

AEC -Q101 qualified.

•