SLDN-06D1Ax

21

Asia-Pacific

+86 755 298 85888

Europe, Middle East

+353 61 225 977

North America

+1 408 785 5200

© 2019 Bel Power Solutions & Protection

Rev. AE.01.19

To provide protection in a fault (output overload) condition, the unit is equipped with internal current-limiting circuitry and can

endure current limiting continuously. At the point of current-limit inception, the unit enters hiccup mode. The unit operates normally

once the output current is brought back into its specified range.

Please see the Digital Feature Descriptions section.

To provide protection in a fault condition, the unit is equipped with a thermal shutdown circuit. The unit will shut down if the

overtemperature threshold of 150oC(typ) is exceeded at the thermal reference point Tref .Once the unit goes into thermal shutdown

it will then wait to cool before attempting to restart.

Please see the Digital Feature Descriptions section.

Please see the Digital Feature Descriptions section.

At input voltages below the input undervoltage lockout limit, the module operation is disabled. The module will begin to operate at

an input voltage above the undervoltage lockout turn-on threshold.

Please see the Digital Feature Descriptions section.

Please see the Digital Feature Descriptions section.