10

10 - 64

For price, delivery, and to place orders, please contact Hittite Microwave Corporation:

20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373

Order On-line at www.hittite.com

Evaluation PCB

The circuit board used in the final application should

use RF circuit design techniques. Signal lines

should have 50 ohm impedance while the package

ground leads and exposed paddle should be con-

nected directly to the ground plane similar to that

shown. A sufficient number of via holes should be

used to connect the top and bottom ground planes.

The evaluation board should be mounted to an

appropriate heat sink. The evaluation circuit board

shown is available from Hittite upon request.

Item

Description

J1 - J4

PCB Mount SMA Connector

J5

2 mm DC Header

C1

4.7 μF Capacitor, Tantalum

C2 - C5

100 pF Capacitor, 0402 Pkg.

T1

Balun, 0805 Pkg.

ANAREN BD1722J50100A

L1

330 nH Inductor, 0805 Pkg.

U1

HMC631LP3(E) Vector Modulator

117196 Evaluation PCB

[1] Reference this number when ordering complete evaluation PCB

[2] Circuit Board Material: Rogers 4350, Er = 3.48

HMC631LP3 / 631LP3E

v00.1007

GaAs HBT VECTOR

MODULATOR 1.8 - 2.7 MHz

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other

rights of third parties that may result from its use. Specifications subject to change without notice. No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarks and registered trademarks are the property of their respective owners.

For price, delivery, and to place orders: Analog Devices, Inc.,

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106

Phone: 781-329-4700 • Order online at www.analog.com

Application Support: Phone: 1-800-ANALOG-D