U1

_____MAX1110 Stand-Alone EV Kit

The MAX1110 EV kit provides a proven PC board lay-

out to facilitate evaluation of the MAX1110. It must be

interfaced to appropriate timing signals for proper

operation. Refer to the MAX1110 data sheet for timing

requirements. Apply your supply voltage between the

VDD pad and the GND pad. Refer to Table 1 for jumper

configurations.

______________MAX1110 EV System

The MAX1110 EV system operates from a user-sup-

plied 9V to 15V DC power supply. The Maxim 68L11D

3V µC board uses a MAX667 linear regulator to gener-

ate the 3V logic supply.

Quick Start

1) Install the MAX1110 EV kit software on your comput-

er by running the INSTALL.EXE program on the flop-

py disk. The program files are copied and icons are

created for them in the Windows 3.1 Program

Manager (or the Windows 95 Start Menu).

2) Check the jumper settings on the MAX1110 EV kit

board. Refer to Table 1,

Jumper Functions, and

Table 2,

Default Jumper Settings.

3) Carefully connect the boards by aligning the 40-pin

header of the MAX1110 EV kit with the 40-pin con-

nector of the µC module. Gently press them togeth-

er. The two boards should be flush against one

another.

_______________General Description

The MAX1110 evaluation system (EV system) is a com-

plete, 8-channel data-acquisition system consisting of a

MAX1110 evaluation kit (EV kit) and a Maxim 3V 68L11D

microcontroller (µC) module. It is designed to evaluate

the MAX1110, a low-power, +3V, 8-channel, 8-bit ana-

log-to-digital converter (ADC) with an internal 2.048V ref-

erence that directly interfaces to 3V microprocessors.

user interface to exercise the MAX1110’s features.

The EV system is intended for comprehensive evalua-

tion of the MAX1110 using a personal computer. Order

the stand-alone EV kit if the 68L11D µC module has

already been purchased with a previous Maxim EV sys-

tem, or for custom use in other µC-based systems.

The MAX1110 EV kit and EV system can also be used to

evaluate the MAX1112, which operates on +5V and has

a 4.096V internal reference. Simply order a free sample

of the MAX1112CPP along with the MAX1110 EV kit.

____________________________Features

o Proven PC Board Layout

o Complete Evaluation System Samples to 5ksps

o Convenient Test Points Provided on Board

o Data-Logging Software

o Fully Assembled and Tested

MAX1110 Evaluation System/

Evaluation Kit

________________________________________________________________

Maxim Integrated Products

1

19-1201; Rev 0; 3/97

PART

TEMP. RANGE

BOARD TYPE

MAX1110EVKIT-DIP

0°C to +70°C

Surface Mount

QTY

DESCRIPTION

MAX1110EVKIT-DIP

1

MAX1110 evaluation kit

68L11DMODULE

1

68L11D µC module

PART

MAX1110 EV System

____________________Component List

MAX1110 EV Kit

____________________Component List

______________Ordering Information

For free samples & the latest literature: http://www.maxim-ic.com, or phone 1-800-998-8800

MAX1110EVL11-DIP

0°C to +70°C

Surface Mount

DESIGNATION QTY

DESCRIPTION

C1–C8

8

0.01µF ceramic capacitors

C9, C11

2

4.7µF, 10V tantalum capacitors

C10

1

0.1µF ceramic capacitor

J1

1

2x20 right-angle socket

J2

1

8-pin header

JU1, JU2, JU3

3

2-pin jumper blocks

JU4

1

3-pin jumper block

JU5

0

Open

R1–R8

8

10k

Ω, 5% resistors

R9

1

10

Ω, 5% resistor

1

Maxim MAX1110CPP

U1

1

20-pin socket

None

1

PC board

None

1

Software disk,

“MAX1110 EVALUATION KIT”

Windows is a registered trademark of Microsoft Corp.

6811D MODULE

AVAILABLE