MODEL: SD10

http://www.m-system.co.jp/

SD10 SPECIFICATIONS

ES-6341 Rev.3 Page 7/9

PANEL CUTOUT unit: mm

68

[68+72×(n - 1)]

+0.7

0

Panel thickness 2.3 – 20

+1

0

■ PANEL CUTOUT unit: mm

• Single mounting

• Clustered mounting

n = number of units

■ CAUTION

• Degree of protection, IP55 is applicable to the front panel of the unit with single mounting according to the specified panel

cutout. Ensure that there is no compromise in the unit's protection against water and dust after installation.

• Install the unit to vertical panel so that its digital meter is at the upper side. Installing by other direction will cause

degradation of life span or performance due to rise of the internal temperature.

• Ensure that there is sufficient space for ventilation inside a panel. Do not install above the devices that generate high

temperature such as heaters, transformers or resistors. Observe at the minimum of 30 mm (1.2”) in all directions for

maintenance purpose.