DWM1001-DEV datasheet(11/15 Pages) QORVO

номер детали	DWM1001-DEV

подробное описание детали	USB connection for reprogramming, debug & power supply

PDF	15 Pages

Scroll/Zoom	100%

производитель	QORVO [Qorvo, Inc]

домашняя страница	https://www.qorvo.com/

Logo

11 / 15 page

DWM1001 Module Development Board Datasheet

Subject to change without notice

Version 1.3

Page 11

POWER SUPPLY AND BATTERY CONNECTIONS

The Power Supply takes its input from USB or from a Battery or from a connected Raspberry Pi. It powers the

module and the other devices on the Module Development Board. It can also charge a connected battery when

The Battery Charger is a Lithium - Ion battery charger. Batteries can be connected to the module development

board at the connectors shown in Figure 12.

Figure 12: Picture of the module development board showing the battery connection points and buttons

BUTTONS SW1 AND SW2

There are two buttons on the PCB, SW1 and SW2. SW1 is connected to the RESETn pin on the DWM1001

module and SW2 is connected to the BT_WAKE_UP pin on the DWM1001 module. SW2 wakes up the Bluetooth

functionality when a tag is in low-power mode, as described in the System Overview document[3]. Buttons are

shown above in Figure 12.

Positive

Battery

Connection

Buttons

connected to

DWM1001

DWM1001-DEV датащи(PDF) 11 Page - Qorvo, Inc