MODEL: R7FN-DC8C

R7FN-DC8C SPECIFICATIONS

ES-7808-U Rev.1 Page 2/5

https://www.m-system.co.jp/

OUTPUT SPECIFICATIONS

Common: 1 common per 4 points (4 points)

Maximum load current: 1.0 A per point

Common current: Max. 4 A (4 terminals)

Maximum outputs applicable at once: No limit (at 24 V DC)

Output supply voltage/current: 24 V DC ±10 %/ ≥ 60 mA

Rated load: 250 V AC @ 2A, 30 V DC @ 2A

(Use as Measurement Category I or less than 125 V AC to

conform with EU Directive)

Maximum switching voltage: 250 V AC, 30 V DC

Maximum switching power: 500 VA (AC), 60 W (DC)

Minimum applicable load: 24 V DC @ 5 mA

When driving an inductive load, external contact protection

and noise quenching recommended.

ON delay time: ≤ 10 msec.

OFF delay time: ≤ 10 msec.

INSTALLATION

Current consumption

• DC: Applox 50 mA

• Relay driving current: Applox. 60 mA

Operating temperature: -10 to +55°C (14 to 131°F)

Storage temperature: -20 to +65°C (-4 to +149°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Atmosphere: No corrosive gas or heavy dust

Mounting: DIN rail (35 mm rail)

Weight: 200 g (0.44 lb)

PERFORMANCE

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 1500 V AC @ 1 minute (output to FLEX

NETWORK to power to FG)

STANDARDS & APPROVALS

EU conformity:

EMC Directive

EMI EN 61000-6-4

EMS EN 61000-6-2

Low Voltage Directive

EN 61010-1, EN 61010-2-201

Measurement Category II (output)

Pollution Degree 2

Output to power: Basic insulation (150 V)

RoHS Directive