MODEL: R5-DS1A

R5-DS1A SPECIFICATIONS

ES-7562 Rev.7 Page 2/3

http://www.m-system.co.jp/

2000 V AC @ 1 minute (power input to FG; isolated on the

power supply module)

STANDARDS & APPROVALS

EU conformity:

EMC Directive

EMI EN 61000-6-4

EMS EN 61000-6-2

RoHS Directive

EN 50581

FUNCTIONS

• Zero/Span Adjustment Modes

Monitor Mode

Re-transmits the input signal as output in proportion.

Output 0 % Adjustment Mode

Adjusts the 0 % output signal using the front UP/DOWN

buttons, in monitoring the output value with a multimeter.

SW1 through SW3 switch the internal increments by 1, 5

and 10.

Output 100 % Adjustment Mode

Adjusts the 100 % output signal using the front UP/DOWN

buttons, in monitoring the output value with a multimeter.

SW4 through SW6 switch the internal increments by 1, 5

and 10.

Simulated Output Mode

Outputs the simulated signals of 0 %, 50 % and 100 %.

• How to Operate

1) Start up in Monitor Mode (SW position = 0) and wait for 2

or 3 seconds.

2) Switch to another mode and go through the adjustments.

3) Reset the switch to the position ‘0’ so that the new

setting is stored in the internal memory.

EXTERNAL VIEW

RUN LED

Zero/Span Adj.

Mode Selector

3

2

4 5 6

1 2 3

RUN

UP

DOWN

UP Button

DOWN Button

Euro Type

Connector Terminals