MODEL: R5-ND2

R5-ND2 SPECIFICATIONS

ES-6131 Rev.7 Page 1/4

http://www.m-system.co.jp/

Remote I/O R5 Series

DeviceNet INTERFACE MODULE

(for 32-point analog signals)

18 (.71)

90

(3.54)

mm (inch)

90

(3.54)

MODEL: R5-ND2[1]

ORDERING INFORMATION

• Code number: R5-ND2[1]

Specify a code from below for [1].

(e.g. R5-ND2/Q)

• Specify the specification for option code /Q

(e.g. /C01)

[1] OPTIONS

blank: none

/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

/C03: Rubber coating

RELATED PRODUCTS

• PC configurator software (model: R5CON)

• EDS file

The EDS file and configurator software are downloadable at

M-System’s web site.

A dedicated cable is required to connect the module to the

PC. Please refer to the internet software download site or

the users manual for the PC configurator for applicable

cable types.

GENERAL SPECIFICATIONS

Connection

DeviceNet: Euro type connector terminal

stripped length 7 mm)

Internal bus: Via the Installation Base (model: R5-BS)

Internal power: Via the base (model: R5-BS)

Isolation: DeviceNet to internal bus or internal power

Data allocation: Fixed to Mode 2

DeviceNet COMMUNICATION

Transmission cable: Approved for DeviceNet

Node address setting: DIP switch; 00 – 63

Baud rate: 125 kbps, 250 kbps, 500 kbps DIP switch

NS (Network Status) indicator: Bi-color (green/red) LED

indicates status of the communication link.

MS (Module Status) indicator: Bi-color (green/red) LED

indicates device status.

Data allocation: 32 words for input data 35 words for output

data

INSTALLATION

Supply voltage to network: 11 – 25 V DC supplied through

the network terminal block

Supply current to network: 50 mA max.

Operating temperature: -10 to +55°C (14 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Atmosphere: No corrosive gas or heavy dust

Mounting: Installation Base (model: R5-BS)

Weight: 100 g (3.53 oz)

PERFORMANCE

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 2000 V AC @ 1 minute (DeviceNet to

internal bus or internal power)

STANDARDS & APPROVALS

EU conformity:

EMC Directive

EMI EN 61000-6-4

EMS EN 61000-6-2

RoHS Directive

EN 50581