Germany: +49 621 776 4411

Pepperl+Fuchs Group

Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.

USA: +1 330 486 0001

Singapore: +65 6779 9091

www.pepperl-fuchs.com

fa-info@us.pepperl-fuchs.com

fa-info@sg.pepperl-fuchs.com

fa-info@de.pepperl-fuchs.com

Measuring sensor with multiple switch points

OQT150-R100-2EP-IO-L

3

Teach-In:

You can use the rotary switch to select the relevant switching threshold A and/or B for teaching in for switch signal Q1 or Q2.

The yellow LEDs indicate the current state of the selected output.

To store a threshold value, press and hold the "TI" button until the yellow and green LEDs flash in phase (approx. 1 s). Teach-In starts when the

"TI" button is released.

Successful Teach-In is indicated by alternating flashing (2.5 Hz) of the yellow and green LEDs.

An unsuccessful Teach-In is indicated by rapidly alternating flashing (8 Hz) of the yellow and green LEDs.

After an unsuccessful Teach-In, the sensor continues to operate with the previous valid setting after the relevant visual fault signal is issued.

Different switching modes can be defined by teaching in the relevant distance measured values

for the switching thresholds A and B:

Single point mode:

Degree of protection

IP67 / IP69 / IP69K

Connection

2 m fixed cable

Material

Housing

PC (Polycarbonate)

Optical face

PMMA

Mass

approx. 36 g

Cable length

2 m

Approvals and certificates

UL approval

E87056 , cULus Listed , class 2 power supply , type rating 1

FDA approval

IEC 60825-1:2007 Complies with 21 CFR 1040.10 and

1040.11 except for deviations pursuant to Laser Notice No.

50, dated June 24, 2007

Curves/Diagrams

Preferences

X

Distance X [mm]

Offset Y [mm]

Characteristic response curve

white 90 %

grey 18 %

black 6 %

0

50

100

150

1.5

1.0

0.5

0

-0.5

-1.0

-1.5

X

white

grey

black

Distance X [mm]

Object colour

Detection ranges

0

20

40

60

80

100

120

140

160