MODEL: R30GCIE1

R30GCIE1 SPECIFICATIONS

ES-9027 Rev.3 Page 1/5

https://www.m-system.co.jp/

Remote I/O R30 Series

CC-Link INTERFACE MODULE

(CC-Link IE Field network)

Functions & Features

• Serves as a gateway for allowing CC-Link IE Field Network

data to be handled by network modules that use different

protocols.

• Recognized as an analog I/O mixed module by the

network modules.

• Works as a slave station on CC-Link IE Field Network in the

same manner as R30NCIE1.

Typical Applications

• A gateway for CC-Link IE Filed and EtherCAT.

98 [3.86]

110

[4.33]

25

[.98]

mm [inch]

MODEL: R30GCIE1S[1]

ORDERING INFORMATION

• Code number: R30GCIE1S[1]

Specify a code from below for [1].

(e.g. R30GCIE1S/Q)

• Specify the specification for option code /Q

(e.g. /C01)

COMMUNICATION MODE

S: Single

[1] OPTIONS

blank: none

/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

/C03: Rubber coating

CAUTION

Please use this unit with a network module (model:

R30NECT1) of firmware version V1.04.10 or higher, and a

network module (model: R30NCIE1) of firmware version

V1.01.13 or higher.

RELATED PRODUCTS

• PC configurator software (model: R30CFG)

Downloadable at M-System’s web site.

For connecting to PC, use commercially available Mini-B

type USB cable. (provided by user)

GENERAL SPECIFICATIONS

Connection

CC-Link IE Field: RJ-45 connector

Internal bus: Via the Installation Base (model: R30BS)

Internal power: Via the Installation Base (model: R30BS)

Isolation: CC-Link IE Field to internal bus or internal power

Internal bus communication cycle: Approx. 1 msec.

Status indicator: RUN, RD, SD, D LINK, ERR, L ER, LINK

(Refer to the instruction manual.)

CC-Link IE Field COMMUNICATION

Protocol: IEEE 802.3

Transmission type: 1000BASE-T

Communication speed: 1 Gbps

Network cable: Cable conformed to CC-Link IE Field

Double shielded twist pair cable (CAT5e)

RJ-45 connector

Network topology: Line, star and ring

Max. number of stations: 120 (Total slave stations)

(Number of max. connectable slaves may vary depending

on the master module. Refer to the instruction manual of

the master module)

Max. station-to-station distance: 100 m

Station type: Remote device station

Link device: RX/RY 128 points, RWw/RWr 64 points

NetWork No.: 1 to 239 (factory default: 1)

INSTALLATION

Current consumption: 140 mA

Operating temperature: -10 to +55°C (14 to 131°F)

Storage temperature: -20 to +65°C (-4 to +149°F)

Operating humidity: 10 to 90 %RH (non-condensing)

Atmosphere: No corrosive gas or heavy dust

Mounting: Installation Base (model: R30BS)

Weight: 125 g (0.28 lb)