MODEL: R6N-SS2

R6N-SS2 SPECIFICATIONS

ES-7781-AN Rev.0 Page 1/3

http://www.m-system.co.jp/

Remote I/O R6 Series

DC CURRENT INPUT MODULE

(2 points, Screw terminal)

Functions & Features

• 2 channels for DC current input, compact size remote I/O

module

• Isolation between channels

• Input range adjustment with DIP switch or PC configurator

mm (inch)

7.5 (.30)

102

(4.02)

102

(4.02)

MODEL: R6N–SS2[1]

ORDERING INFORMATION

• Code number: R6N-SS2[1]

Specify a code from below for [1].

(e.g. R6N-SS2/Q)

• Specify the specification for option code /Q

(e.g. /C01)

[1] OPTIONS

blank: none

/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

RELATED PRODUCTS

• PC configurator software (model: R6CON)

Downloadable at M-System’s web site.

A dedicated cable is required to connect the module to the

PC. Please refer to the internet software download site or

the users manual for the PC configurator for applicable

cable types.

GENERAL SPECIFICATIONS

Connection

Internal bus: Via the Installation Base (model: R6N-BS)

Input: M3 screw terminals (torque 0.5 N·m)

Internal power: Via the Installation Base (model: R6N-BS)

Recommended solderless terminal: Max. 5.8 mm (0.23”)

wide; Ones with insulation sleeve do not fit.

Housing material: Flame-resistant resin (black)

Isolation: Input 1 to input 2 to internal bus or internal power

Zero adjustments: PC programming

Span adjustments: PC programming

Input range: Selectable with the side DIP SW or PC

programming

Module address: Selectable with DIP and rotary switches on

the side

Configuration mode: With DIP switches on the side panel

Power indicator: Green LED; Refer to the istruction manual

for details.

Status indicator: Bi-color (red/green) LED;

Refer to the instruction manual for details.

■Recommended solderless terminal (unit: mm (inch))

3.2 (.13) dia.

4 min.

(.16)

5.5 max.

(.22)

INPUT SPECIFICATIONS

■ Narrow Span: 1500 Ω input resistor incorporated

Input range: -1 – +1 mA, 0 – 1 mA DC

■ Wide Span: 24.9 Ω input resistor incorporated

Input range: -40 – +40 mA, -20 – +20 mA,

0 – 40 mA, 0 – 20 mA, 4 – 20 mA DC

INSTALLATION

Current consumption: 20 mA

Operating temperature: -10 to +55°C (14 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Atmosphere: No corrosive gas or heavy dust

Mounting: Installation Base (model: R6N-BS)

Weight: 60 g (2.1 oz)

PERFORMANCE

Conversion rate (PC programmable. Factory set to 80

msec.)/conversion accuracy:

10 msec./±0.8 %

20 msec./±0.4 %

40 msec./±0.2 %

80 msec./±0.1 %