MODEL: R5T-PC2

R5T-PC2 SPECIFICATIONS

ES-7574 Rev.9 Page 2/3

https://www.m-system.co.jp/

STANDARDS & APPROVALS

EU conformity:

EMC Directive

EMI EN 61000-6-4

EMS EN 61000-6-2

Low Voltage Directive

EN 61010-1, EN 61010-2-201

Measurement Category II (output)

Pollution Degree 2

Output to internal bus or internal power – Basic insulation

(300 V)

RoHS Directive

FUNCTIONS

■ Counter reset

1) Remove Network Module or its cables and interrupt

communication with other devices.

2) Turn ON the Counter Reset SW (SW8) on the module.

3) Return the module to the base and turn the power supply

on.

4) Red RUN LED turns on and the module starts resetting its

counter. When the resetting is complete, the LED light turns

to green. DO NOT remove the power while the red light is

on.

5) After the green LED is confirmed, turn the power supply

off.

6) Turn OFF the Counter Reset SW (SW8).

7) Return the Network module onto the base and turn the

power supply on.

Note: Counter Reset SW must be turned OFF after this

procedure because the module does not start counting with

ON state.

EXTERNAL VIEW

Counter Reset SW is normally OFF during operation.

RUN

4

3

2

1

6

5

1

2

3

4

Status Indicator LED

RUN LED

1

Counter

Reset

Unused

2 3 4 5 6 7 8

ON

OFF

Pulse Width

■ SIDE VIEW

■ FRONT VIEW