MODEL: MDW5-CC

MDW5-CC SPECIFICATIONS

ES-8220 Rev.5 Page 1/3

https://www.m-system.co.jp/

Lightning Surge Protectors for

Electronics Equipment M-RESTER

LIGHTNING SURGE PROTECTOR FOR CC-Link

Functions & Features

• For CC-Link communication

• Designed specifically for the network

• Available with CC-Link Ver.1.10/2.00

• DIN rail mounting

45 [1.77]

97 [3.82]

41 [1.61]

mm [inch]

MODEL: MDW5–CC

ORDERING INFORMATION

• Code number: MDW5-CC

APPLICABLE NETWORK

CC-Link Ver.1.10/2.00

GENERAL SPECIFICATIONS

Construction: Terminal block

Connection

Surge side: M3.5 screw terminals (torque 0.8 N·m)

Protected device side: M3 screw terminals

(torque 0.8 N·m)

Screw terminal: Nickel-plated steel

Housing material: Flame-resistant resin (black)

INSTALLATION

Operating temperature: -5 to +55°C (23 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: DIN rail

Weight: 100 g (0.22 lb)

PERFORMANCE

Max. continuous operating voltage (Uc):

Line to line (DA - DB): ±5 V

Line to earth (DA or DB - DG): ±5 V

Line to shield or earth (DG - SLD or FG): ±50 V

Voltage protection level (Up):

@ 4 kV (1.2/50 μsec.)

Line to line (DA-DB): ±20 V

Line to earth (DA or DB to DG): +20 V, -10 V

Line to shield or earth (DG - SLD or FG): ±300 V

Response time:

Line to line (DA-DB): ≤ 4 nsec.

Line to line (DA or DB - DG): ≤ 4 nsec.

Line or shield to earth (DG - SLD or FG): ≤ 20 nsec.

Leakage current (@ max. continuous operating voltage)

Line to line (DA - DB): 0.2 mA

Line to line (DA or DB to DG): 0.2 mA

Line to shield or earth (DG to SLD or FG): 1 mA

Maximum discharge current: 10 kA (8/20 μsec.)

Max. load current: 100 mA

Internal series resistance: Approx. 2 Ω (per wire)

Capacitance @ 1 MHz:

Line to line (DA to DB): approx. 30 pF

Line to Line (DA or DB to DG): approx. 60 pF

Line to earth (DG to SLD or FG): approx. 1000 pF

Surge protection: IEC 61643-21 Categories C1, C2, D1

STANDARDS & APPROVALS

EU conformity:

EMC Directive

EMS EN 61000-6-2

RoHS Directive