RHOPOINT COMPONENTS Hurst Green, Oxted, Surrey RH8 9AX UK
Telephone: +44 (0) 870 608 1188
Fax: +44 (0) 870 241 2255
Internet: www.rhopointcomponents.com
IL715/6/7
ISOLOOP®
4
Notes:
1.
Absolute Maximum ambient operating temperature means
the device will not be damaged if operated under these
conditions. It does not guarantee performance.
2.
PWD is defined as | t
PHL–tPLH |.
%PWD is equal to the
PWD divided by the pulse width.
3.
t
PSK is equal to the magnitude of the worst case difference in
t
PHL and/or tPLH that will be seen between units at 25
OC.
4.
CM
H is the maximum common mode voltage slew rate that
can be sustained while maintaining V
O > 0.8 VDD.CML is
the maximum common mode input voltage that can be
sustained while maintaining V
O < 0.8 V. The common
mode voltage slew rates apply to both rising and falling
common mode voltage edges.
5.
Device is considered a two terminal device:
pins 1–8 shorted and pins 9–16 shorted.
250
200
100
0
0
50
ROOM
TEMPERATURE
100
150
200
250
TIME (SECONDS)
160ºC
150ºC
140ºC
PRE HEATING TIME
2.5ºC
±0.5ºC / SEC
PEAK TEMPERATURE 245º C
PEAK TEMPERATURE 240°C
PEAK TEMPERATURE 230ºC
SOLDERING TIME
200ºC
PRE HEATING RATE 3ºC + 1ºC /-0.5ºC /SEC.
REFLOW HEATING RATE 2.5º C
± 0.5ºC /SEC.
TIGHT
TYPICAL
LOOSE
200º C
50 SEC
30 SEC
30 SEC
3ºC+1ºC /-0.5ºC
150ºC, 90
±30 SEC.
IR Soldering Profile
Russian ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
