MODEL: MD7G

MD7G SPECIFICATIONS

ES-8065 Rev.3 Page 1/2

http://www.m-system.co.jp/

Lightning Surge Protectors for

Electronics Equipment M-RESTER

TERMINAL BLOCK FOR GROUNDING

(ultra-slim)

Functions & Features

• Relaying terminal block in order to connect wires to the

DIN rail for grounding

• Used to ground the shield wire or to cross wire the devices

protected by the surge protector

MODEL: MD7G-G[1]

ORDERING INFORMATION

• Code number: MD7G-G[1]

Specify a code from below for [1].

(e.g. MD7G-G/Q)

• Specify the specification for option code /Q

(e.g. /C01)

GROUNDING

G: Grounding

[1] OPTIONS

blank: none

/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

RELATED PRODUCTS

•Lightning surge protector for strain gauge (model: MD7LC)

GENERAL SPECIFICATIONS

Construction: Slim-sized front terminal structure

Degree of protection: IP20

Connection: Euro terminal block (torque 0.3 N·m)

Grounding: DIN Rail

Housing material: Flame-resistant resin (black)

INSTALLATION

Operating temperature: -25 to +85°C (-13 to +185°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: DIN Rail (TH35-7.5, 1-mm-thick)

Oxide film on the surface of an aluminium DIN rail may

lower the electric conductivity between this module and the

ground. Use a steel or copper rail.

Weight: 70 g (2.5 oz)