| поискавой системы для электроныых деталей |
|
MAX17823BGCV датащи(PDF) 46 Page - Maxim Integrated Products |
|
|
|||||||||||||||||||||||||||||
MAX17823BGCV датащи(HTML) 46 Page - Maxim Integrated Products |
|
46 / 121 page ![]() ________________________________________________________________________________________________________________________________________________________________ MAX17823B 12-Channel High-Voltage Data Acquisition System www.maximintegrated.com Maxim Integrated | 46 Battery Management UART Protocol The Battery-Management UART Protocol uses the following features to maximize the integrity of the communications: • All transmitted data bytes are Manchester-encoded where each data bit is transmitted twice with the second bit inverted (G.E. Thomas convention). • Every transmitted character contains 12 bits which include a start bit, a parity bit, and two stop bits. • Read/write packets contain a CRC-8 Packet Error Checking (PEC) byte • Each packet is framed by a preamble character and stop character. • Read packets contains a data-check byte for verifying the integrity of the transmission. The protocol is also designed to minimize power-consumption by allowing slave devices to shut down if the UART is idle for a specified period of time. The host must periodically transmit data to prevent shutdown unless the SHDNL input is driven externally. Command Packet A command packet is defined as a sequence of UART characters originating at the host. Each packet starts with a preamble character, followed by data characters, and ending with a stop character as shown in Figure 27. After sending a packet, the host either goes into idle mode or sends another packet. Figure 27. Command Packet Preamble Character The preamble is a framing character that signals the beginning of a command packet. It is transmitted as an un- encoded 15h with a logic one parity bit and a balanced duty-cycle. If any bit(s) other than the stop bits deviate from the unique preamble sequence, then the character is not interpreted as a valid preamble, but rather as a data character. S 1 1 0 0 1 0 0 0 E=1 P P Optional Idle Optional Idle Idle Disable Idle Enable Figure 28. Preamble Character |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |