MODEL: 6TS

6TS SPECIFICATIONS

ES-4212 Rev.9 Page 2/3

http://www.m-system.co.jp/

Minimum temperature span (in °F)

(PR): min. span 670°F

K (CA): min. span 140°F

E (CRC): min. span 90°F

J (IC): min. span 110°F

T (CC): min. span 140°F

B (RH): min. span 1410°F

R: min. span 650°F

S: min. span 690°F

Note: For the temperatures that range below 0°C, the

transmitter may partially not satisfy the described accuracy.

Consult factory.

OUTPUT SPECIFICATIONS

Output: 4 – 20 mA DC

Load resistance vs. supply voltage: Load Resistance (Ω) =

(Supply Voltage (V) – 13 (V)) ÷ 0.02 (A)

(including leadwire resistance)

10

15

20

25

28

13

0

150

300

450

600

750

SUPPLY VOLTAGE [V]

(550Ω maximum at 24V DC)

INSTALLATION

Supply voltage: 13 – 28 V DC

Operating temperature: -5 to +70°C (23 to 158°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: DIN rail with mounting plate A-31; surface

mounting with adapter plate A-01; spring clip A-02 for 3-

inch hub

Weight: 220 g (0.49 lb)

PERFORMANCE in percentage of span

Accuracy: ±0.4 % (at over 400°C or 750°F for R, S and PR;

over 770°C or 1420°F for B)

Cold junction compensation error

(at 25°C ±10°C or 77°F ±18°F)

K, E, J & T: ±0.5°C or ±0.9°F

S, R & PR: ±1°C or ±1.8°F

Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)

(at over 400°C or 750°F for R, S and PR; over 770°C or

1420°F for B)

Response time: ≤ 0.5 sec. (0 – 90 %)

Burnout response: ≤ 10 sec.

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 500 V AC @ 1 minute

(input to output)

1500 V AC @ 1 minute

(input or output to ground)