MODEL: 6DVI-B

6DVI-B SPECIFICATIONS

ES-4214 Rev.6 Page 1/8

http://www.m-system.co.jp/

Field-mounted Two-wire Signal Conditioners 6-UNIT

4-DIGIT LOOP POWERED INDICATOR

(outdoor enclosure, intrinsically safe)

Functions & Features

• 4-digit LED display

• No external power source needed

• Scaling, linearization and other configurations selectable

via three front control buttons

• Stainless steel enclosure optional

Note: Differences between the 6DV-B and the 6DVI-B exist

only in safety parameters. Refer to the relevant section for

more information.

MODEL:6DVI–B–[1][2][3][4][5]

ORDERING INFORMATION

• Code number: 6DVI-B-[1][2][3][4][5]

Specify a code from below for each of [1] through [5].

(e.g. 6DVI-B-2T01/S)

• Use Ordering Information Sheet (No. ESU-4220). Factory

standard setting will be used if not otherwise specified.

• Specify the country in which the product is to be used with

the Safety Approval code 2.

[1] SAFETY APPROVAL

1: FM intrinsically safe

2: ATEX intrinsic safety

[2] TERMINAL BLOCK

0: None (Euro type terminal block at the rear of indicator module)

T: Incorporated

[3] WIRING CONDUIT

0: G 1/2

1: 1/2 NPT

2: M20 × 1.5

3: PG 13.5

[4] MOUNTING BRACKET

0: Without

1: With

[5] OPTIONS

Enclosure Materials

Blank: Diecast aluminium enclosure

/S: Stainless steel enclosure

PACKAGE INCLUDES...

• Mounting screws

Bolt (M8 x 15): 4 pcs.

Spring washer for M8: 4 pcs.

• Mounting bracket assembly (option)

Mounting bracket: 1

M10 U-bolt: 2

Nut for M10: 4

Spring washer for M10: 4

Material: Stainless steel 304 (for aluminum enclosure)

Stainless steel 316 (for stainless steel enclosure)

Applicable pipe: 1 1/2” min.; 2” max.

• Engineering unit label (1)

GENERAL SPECIFICATIONS

Degree of protection: NEMA 4X, IP66/IP67

Wiring conduit: See ‘Ordering information.’

Electrical connection:

• Without terminal block: Euro terminal block (Applicable

mm)

• With terminal block:

M3 screw terminal (torque 0.5 N·m)

Screw terminal:

• With terminal block: Nickel-plated steel

Materials

Meter housing: Flame-resistant resin (black)

Enclosure: Diecast aluminium standard; stainless steel

casting optional (equivalent to type 316); silver color, epoxy

resin coated

Isolation: Input to outdoor enclosure

(Default setting: Proportional)

A/D conversion: Dual-slope integration

Security: Protecting settings

Scaling: Programming via the front buttons